Please see our COVID-19 Statement
Binding Router Bit Set

Binding Router Bit Set

Binding Router Bit Set Standard set

Standard set

Item # 1298
In stock, ready to ship!

$124.62

+
Binding Router Bit Set Complete set

Complete set

Item # 1297
In stock, ready to ship!

$189.25

+
 
Total:
Qty:
Scroll to Top

Binding Router Bit Set

About This Item

Rout clean, precise ledges for practically any binding combination.

Our clean-cutting carbide-tipped cutter has a 1/4" shank to fit your router, an Allen screw with wrench for installing a depth-of-cut bearing, and a special extension bushing for "stairstep" ledges.

Money-saving sets add depth-of-cut bearings sized specifically for binding routing jobs, and for flush-trimming guitar tops and backs. Instructions included. Router bit and bearings are also available separately.

Tip: All our bearings are now sized for exact cutting depth. Remember to allow for swelling of wood fibers from gluing, as well as for the thickness of the glue itself. Glued plastic binding will swell considerably as it absorbs the glue solvents. Wood bindings glued with wood glues that contain water will swell also. To minimize final scraping and sanding, we recommend installing a short length of binding on routed scrap wood first, to test the fit.


#1298 Standard Binding Router Bit Set
Bearings in the Standard set are for common binding thicknesses (listed below), and match our bindings, including Herringbone purfling. Flush bearing is for trimming glued bindings, and newly assembled guitar tops and backs.

Includes:
9 bearing sizes
Router bit
Allen wrench
Extension bushing
Instructions
Bearing diameter    Size of ledge cut   
.925" (23.50mm) Flush
.840" (21.34mm) .040" (1.02mm)
.800" (20.32mm) .060" (1.52mm)
.780" (19.81mm) .070" (1.78mm)
.740" (18.80mm) .090" (2.29mm)
.720" (18.29mm) .100" (2.54mm)
.680" (17.27mm) .120" (3.05mm)
.620" (15.75mm) .150" (3.81mm)
.520" (13.21mm) .200" (5.08mm)



#1297 Complete Binding Router Bit Set
This is the most affordable binding router set offered to luthiers. You'll save money AND be ready for practically any binding job.

Includes:
19 bearing sizes
Router bit
Allen wrench
Extension bushing
Instructions
Bearing diameter    Size of ledge cut   
.925" (23.50mm) Flush
.840" (21.34mm) .040" (1.02mm)
.820" (20.83mm) .050" (1.27mm)
.800" (20.32mm) .060" (1.52mm)
.780" (19.81mm) .070" (1.78mm)
.760" (19.30mm) .080" (2.03mm)
.740" (18.80mm) .090" (2.29mm)
.720" (18.29mm) .100" (2.54mm)
.700" (17.78mm) .110" (2.79mm)
.680" (17.27mm) .120" (3.05mm)
.660" (16.76mm) .130" (3.30mm)
.640" (16.26mm) .140" (3.56mm)
.620" (15.75mm) .150" (3.81mm)
.600" (15.24mm) .160" (4.06mm)
.580" (14.73mm) .170" (4.32mm)
.560" (14.22mm) .180" (4.57mm)
.540" (13.72mm) .190" (4.83mm)
.520" (13.21mm) .200" (5.08mm)
.500" (12.70mm) .210" (5.33mm)


Router bit dimensions
6-degree cutting edge downshear prevents grabbing on climb cuts, for cleaner results.
Cutter diameter.925" (23.50mm)
Cutting height without bearing.375" (9.52mm)
Arbor shank diameter.25" (6.35mm)


Router bit and bearings are also available separately.


CALIFORNIA PROPOSITION 65 WARNING
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.


Trade Secrets!

Trade Secrets!

"Which binding tools should I choose?"

Erick Coleman answers a frequent question from customers: Which tools to use for routing channels for instrument bindings?

Instructions

Product Instructions

How to Install Bindings

Overview of binding, purfling, and other instrument trim, including binding recommendations and installation techniques.

Product Instructions

Using the Binding Router Bit and Bearings

Tips for routing binding ledges using the Binding Router Bit and Bearings, including how to choose the correct bearing, hand routing and using router tables.

Customer Reviews

  • Excellent
  • Good
  • Average
  • Fair
  • Poor
Write a review
5.0
  • 4.75 average rating from 71 reviews
Sort by
5.0

Quality bit set

By

Verified Buyer


I am working on my first instrument build (uke). Trying to buy tools only as needed, and I think a good bit set for binding routing definitely falls in that category. The bit set is of very good quality and was well protected for shipping. the bit has a nice long shaft and worked well in my router table setup. Instructions were very good.

5.0

Fantastic!

By

Verified Buyer


I should have purchased this tool set a long time ago. It is a game changer. The larger set would be optimal for the tool drawer but it’s getting a little spendy for my tool budget.

5.0

Works great!

By

Verified Buyer


First time using this set and it performed flawlessly. The instructions are easy to follow. I used this bit on a table router and was very pleased.

5.0

Great for precision routing!

By

Verified Buyer


This was my first attempt at routing binding channels. I have the Dremel router attachment, but didn’t feel comfortable with the different angles due to the 5 degree arch to the back. I am so glad I got this router bit and bearings. So easy to set up and the binding and purfling came out great.

5.0

Top!

By

Verified Buyer


Thank you from France.
Thank you Stewmac for this set!

5.0

Router bit set

By

Verified Buyer


Worked great for the binding and purging. Was my first time doing this and no problems.

5.0

Great tool!

By

Verified Buyer


I can’t believe I waited so long to purchase this. I have had great results with less setup time. I do however wish there were a couple smaller size bearings. I wasn’t able to cut deep enough to accommodate.080 wood binding, herringbone purfling and an additional B/W .040 purfling.

5.0

Excellent for Guitar Bindings and Purfling

By

Verified Buyer


The price is a little high; however, the kit is perfect for routing for purflings and bindings. It comes with the right sized bearings for whatever size you need.

5.0

Excellent product

By

Verified Buyer


I was a bit reluctant while ordering these but man.just used it yesterday and I'm completely blown away by the precision and quality of the bit and bearings due to which getting such a precise cut was only possible no tearout or left over fibers ... highly recommend this don't think just buy I'm sure it will never let you regret .. thanks Stewmac

5.0

Worked perfectly

By

Verified Buyer


Purchased this set for a OM acoustic kit build. Perfect, clean binding channels. Could not be happier.

Showing 10 of 71 Read more reviews >>