Please see our COVID-19 Statement
Neck Relief Gauge and Nut Slotting Gauge Set

Neck Relief Gauge and Nut Slotting Gauge Set

Neck Relief Gauge and Nut Slotting Gauge Set

Item # 2005
In stock, ready to ship!

List Price $209.24
Your Price $198.78

+
 
Total:
Qty:
Scroll to Top

Neck Relief Gauge and Nut Slotting Gauge Set

About This Item

Good playability is measurable. It doesn't have to be guesswork!

We designed our precision gauges so you can build, setup and repair guitars with repeatable accuracy.

Each of these gauges are available separately, or you can SAVE when you buy them as a set.

Our Nut Slotting Gauge measures the heights of the strings over the first fret, so you can cut more accurate nut slots. Also sold separately

The Neck Relief Gauge accurately measures the amount of variation from a dead flat position, to take the guesswork out of adding or subtracting neck relief as you adjust the truss rod. Also sold separately


CALIFORNIA PROPOSITION 65 WARNING
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.


Instructions

Product Instructions

Neck Relief Gauge Instructions

The Neck Relief Gauge is a quick and easy way to measure a guitar's neck relief/curvature when adjusting the truss rod.

Nut Slotting Gauge Instructions

How to determine nut slot depth with the Nut Slotting Gauge.

Customer Reviews

  • Excellent
  • Good
  • Average
  • Fair
  • Poor
Write a review
4.5
  • 4.43 average rating from 14 reviews
Sort by
5.0

Amazing tools

By

Verified Buyer


I am a newbie to guitar setup and elementary luthery. I am however an apt student and a reasonalbly good woodworker with a full set of general woodworking tools.
These StewMac devices are a dream. Dead accurate, well made, a dream to work with and perfect for me. If you have a bit of sensitivity and appreciation for wood and fine wood in guitars then using these tools you will be able to measure, determine the change needed or desired and dial it in precisely.
There are few things more satisfying in life that doing a task that requires skill and precision and pulling it off perfectly. Thanks StewMac. You guys rock!

4.0

Metric please

By

Verified Buyer


I really love this tool. You can be very precise and consistent in your setup with this. Other review already tell about how great this tool is (and some minor precision issue). I agree with them. I just would like StewMac to do a BASS version of this tool and a METRIC gauge, or gauge face that we can swap with the imperial one, as it's a way cheaper option.
That's why I gonna give 4 stars.

4.0

A must have in my opinion

By

Verified Buyer


I do second the small gripe about the relief gauge from the previous review, however, it is still a vastly superior option to feeler gauges.

I suspect as I use the tool more and more, I'll get a better handle on holding it at a right angle to the crown of the frets.

where this one really earns it's way is the headstrong player who thinks you messed something up, you can now prove to them that all measurements are well within acceptable levels, and that they just need to practice.

5.0

Just what I needed!

By

Verified Buyer


I wanted to be much more scientific when setting up my twelve or so guitars. I want to make my settings repeatable - instead of just sight and feel. This is just what the Doctor ordered.

4.0

It all depends

By

Verified Buyer


The Nut Slotting Gauge part of this set is wonderful. True, you must subtract the reading from 100 to get the distance and it would be more convenient if the tool generated the actual number straight out. I simply write them down as I go across the fingerboard and do the math after. In any case, this is hugely better than using feeler gauges, especially on the middle strings, if they must be snaked across radiused frets. And for 12th (or 13th) fret readings, which I consider critical to setup, there simply is no comparison between this tool and feeler gauges. It wins, hands down. Perhaps it ought to be renamed String Height Gauge. The Neck Relief Gauge is a different case, however. Those who say there are calibration issues do not ring a bell for me. I calibrated it both on a jointer bed and a straight edge, got the same result in both cases, and consider that a non issue. The instructions are clear how to do it. It takes less than a minute. The instructions are less clear, however, about how to use the tool once calibrated. It works as advertised on FLAT fingerboards. Because the feet are small, you must be careful to sense when the tool is square with the frets, but it is definitely something that I could sense easily. When the tool is square with a flat fingerboard, the readings are accurate and consistent. Flat fingerboards are found on classical guitars and most of them do not provide truss rods, so it is sort of beside the point to measure relief, unless it is so bad that you must remove the frets and plane the fingerboard. Radiused fingerboards are a different ballgame. They are found on most steel stringed instruments, which are usually equipped with adjustable truss rods, and so are the targets for the use of this tool. But the radius prevents the feet from "setting" square. Instead, you must rely upon either your intrinsic sense of what constitutes a right angle, or in my case, take multiple measurements as the tool is rocked back and forth, accepting the lowest reading as the "true" one. I proposed a solution to tech support that I thought would resolve the issue for radiused fingerboards but they say it won't work. I won't argue the point here. Instead, I plan to return this part of the set. I find it just as easy to capo the first fret, depress the strings at the 13th, and use a feeler gauge to measure relief. And ultimately more accurate because every reading is consistent. So, if you buy the set, consider yourself forewarned. There are significant limitations associated with the Neck Relief Gauge that may or may not trouble you. If I were rating the tools separately, I would give the Nut Slotting Tool a 5, and the Neck Relief Gauge a 2. In fact, I consider the Nut Slotting Tool a "must have" for anyone who is unwilling to accept eyballing to the nearest 1/64th as close enough for doing a setup. It is also great for dealing with a client who might not have as good an eyeball as yours.

5.0

neck setup tools

By

Verified Buyer


Homerun! These tools make neck relief and nut depth much easier!

5.0

Killer tools...!

By

Verified Buyer


What's with all the drama? The underside of a quality bubble level is a planed surface. These tools ROCK!!!

3.0

Nut Slotting Gauge

By

Verified Buyer


Honestly! A little disappointed at first! The nut slotting gauge I received would not function when I received it! So I pulled it apart and discovered than travel stop pin had wound itself out and jammed the plunger travel. A quick tighten and away it went. Excellent! Watch out for the weight on the strings and double check with feeler gauges.

4.0

Neck Relief Gauge

By

Verified Buyer


The relief gauge is quick accurate and easy to use! But is limited to guitars with the right fret spacing and some Bass Guitars if the gauge can sit directly on the fretboard itself! Still an excellent tool to have in the workshop.

4.0

Double check your readings

By

Verified Buyer


I have used both these tools every day since receiving them but I would say to make sure you double check your readings especially with the nut gauge. Cheers for some helpful tools guys it has cut time off nut work and setups.

Showing 10 of 14 Read more reviews >>