Gripper Truss Rod Wrenches

Gripper Truss Rod Wrenches, For 1/8" Allen nut
For 1/8" Allen nut Item # 6107-G In stock, ready to ship!
$13.23
Gripper Truss Rod Wrenches, For 1/8" Allen nut; single-bend with  2" reach for clearance on 6-in-line peghea
For 1/8" Allen nut; single-bend with 2" reach for clearance on 6-in-line peghea Item # 6210-G In stock, ready to ship!
$12.02
Gripper Truss Rod Wrenches, For 4mm Allen nut
For 4mm Allen nut Item # 6113-G In stock, ready to ship!
$13.23
Gripper Truss Rod Wrenches, For 3/16" Allen nut
For 3/16" Allen nut Item # 6115-G In stock, ready to ship!
$13.23
Gripper Truss Rod Wrenches, For 5mm Allen nut
For 5mm Allen nut Item # 6108-G In stock, ready to ship!
$13.23
Gripper Truss Rod Wrenches, For 1/8" soundhole nut; single-bend with 5-3/8" reach
For 1/8" soundhole nut; single-bend with 5-3/8" reach Item # 6209-G In stock, ready to ship!
$12.02
Gripper Truss Rod Wrenches, For 1/8" soundhole nut; triple-bend with 5-3/4" reach
For 1/8" soundhole nut; triple-bend with 5-3/4" reach Item # 6211-G In stock, ready to ship!
$12.02
Gripper Truss Rod Wrenches, For 4mm soundhole nut; triple-bend with 5-3/4" reach
For 4mm soundhole nut; triple-bend with 5-3/4" reach Item # 6212-G In stock, ready to ship!
$12.02
Gripper Truss Rod Wrenches, For 5mm soundhole nut; single-bend; 2" reach
For 5mm soundhole nut; single-bend; 2" reach Item # 6110-G In stock, ready to ship!
$11.90
Gripper Truss Rod Wrenches, For 5mm soundhole nut; single-bend with 4-1/2" reach
For 5mm soundhole nut; single-bend with 4-1/2" reach Item # 6114-G In stock, ready to ship!
$11.90
Gripper Truss Rod Wrenches, Set of 10
Set of 10 Item # 6099 In stock, ready to ship!
$124.80
$109.82
Original:
$
Save:
$
Total:
$
Qty:
Please enter a quantity

Gripper Truss Rod Wrenches

Dang! Somebody used the wrong size wrench, and now you can't adjust that worn Allen truss rod nut. Fear not, our Gripper wrenches can save the day!

Each wrench has a 3/8"-long end that tapers from slightly undersize to slightly oversize, giving you a snug fit to turn the nut and avoid a costly replacement job.

Our veteran guitar technicians developed these high quality steel truss rod wrenches. The length, comfortable rubberized handles, durability and variety of sizes let you perform formerly difficult truss rod adjustments with ease. The straight wrenches are 12-1/2" long, keeping your knuckles safely away from the peghead.

#6210-G Gripper wrench has a special angled handle for tuner clearance on 6-in-line pegheads. For 1/8" Allen nut; 2" reach.

Special notes for the soundhole wrenches
4mm is for Hot Rod truss rods. #6110-G is for pre-August 2007 Martins; #6114-G and #6212-G are for later Martins. Triple-bend wrenches provide clearance under the guitar's braces.
Hot Rod® is a registered trademark of Stewart-MacDonald Manufacturing Company, Inc.
California Proposition 65 Warning
Cancer and Reproductive Harm