Premium Wiring Kit for Telecaster with 4-way Switch
Complete kit for wiring a Tele with a fourth "fat tone" switch position.
This special kit features an Oak Grigsby 4-way switch: the extra position combines the bridge and neck pickups in series for a fatter tone. You get all the parts you'll need to wire your pickups into your Tele®, plus a diagram to show you how.
Premium components include cloth-covered push-back wire—the right stuff for Fender and vintage-style guitar circuitry. CTS pots give longer life and smooth, accurate response.
-
The kit incudes:
- Switchcraft output jack
- 250K CTS solid-shaft control pots (2)
- Orange Drop® capacitors: .047uF and .001uF
- Oak Grigsby 4-way lever switch with mounting screws
- Switch knobs: black barrel and top-hat
- Non-shielded cloth-insulated push-back wire: 22 AWG white, 12" long
- Non-shielded cloth-insulated push-back wire: 22 AWG black, 24" long
- Braided-shield push-back wire: 22AWG, 12" long
- Wiring diagram
| Shaft diameter | 1/4" (6.35mm) solid shaft (requires a set-screw knob) |
|
| Thread | 3/8" x 32 | |
| Thread height | 3/8" | (9.52mm) |
| Required mounting hole diameter | 3/8" | (9.52mm) |
Oak Grigsby switch specifications
| Body cavity depth required | 1-7/16" (36.51mm) |
| Mounting screw spacing | 1-5/8" (41.28mm) |
| Lever stem | .050" x .190" (1.27mm x 4.82mm) |
| Pickguard slot required (for the lever) |
1/16" x 1-1/16" (1.59mm x 26.99mm) |
Telecaster®, Tele®, and Esquire® are registered trademarks of Fender Musical Instruments Corporation.
