Fender American Original 60s Stratocaster Neck

Rosewood Fingerboard Item # 101532 No longer available

Sorry, this item cannot ship outside the US due to manufacturer restrictions.

Sold out
Please enter a quantity

Sorry, this item cannot ship outside the US due to manufacturer restrictions.

Fender American Original 60s Strat Neck

Don't miss your chance! These figured maple American-made Fender necks are only available as a special limited run, and supplies are limited. Through our partnership with Fender we managed to secure a small stash for our customers.

Crafted in the same facility as their U.S.-made instruments, the Fender American Original 60s Stratocaster Neck captures the same look and playability that made those Strats highly-prized instant classics. Due to the nature of the wood, no two necks are alike and the degree of figuring will vary.

The figured maple neck features the "C" shape neck profile which has been endlessly copied for its effortless feel and instant comfort in the hand.

Other features include a 9.5"-radius rosewood fingerboard, 21 vintage tall frets, bone nut, and a gloss nitrocellulose lacquer finish. The bone nut is pre-slotted with "pilot" string location grooves to make spacing a breeze when dialing-in your final setup. This replacement neck is the perfect way to give your Strat an unmistakable 60s feel.

For true Fender authenticity, it's also serialized and stamped, down to the classic logo headstock decal.


  • 9.5" radius
  • Maple neck
  • Rosewood fingerboard
  • 21 vintage tall frets
  • Pre-slotted bone nut
  • Curved bottom nut slot
  • "C" shape neck profile
  • Neck mounting holes drilled
  • Vintage heel adjust truss rod with slotted adjustment nut
  • Six tuning machine holes designed for vintage style 2-screw tuning machines
  • Gloss nitrocellulose lacquer finish
  • Made in the USA


  • Scale length: 25-1/2" (647.70mm)
  • Width at nut: 1-21/32" (42mm)
  • Fretwire: vintage tall
  • Approximate heel length: 4" (101mm)
  • String post spread: 4-11/16"
  • Peghole size: 23/64" (9.09mm)

Neck Thickness:

  • At 1st fret: 0.825" (20.95mm)
  • At 12th fret: 0.975" (24.76mm)

Because Fender genuine replacement necks have not been mounted to guitar bodies, final steps like refining the nut slots, fret work, fitting the neck to the neck pocket, and other instrument setup procedures will need to be done for optimum playability. This replacement neck is for a Fender or Squier by Fender guitar.

Stratocaster®, Strat®, and Squier® are registered trademarks of Fender Musical Instruments Corporation.
California Proposition 65 Warning
Cancer and Reproductive Harm