Black painted maple biscuit bridge for National™ style resonator guitars. 2-11/32" (59.53mm) diameter, 55/64" (21.82mm) overall height, 19/32" (15.09mm) from top of biscuit to top of saddle. CALIFORNIA PROPOSITION 65 WARNING WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
A step up, but be ready... By Leo from La Grange, CA Monday, November 30, 2020 Verified Buyer I bought this solid bridge to accompany the Beard cone I ordered to replace the parts in a Recording King Dirty 30's resonator. (The biscuit bridge was a two piece, and needed the bridge itself shimmed to eliminate a rattle.) The cone fit fine, but the screw included with the bridge was WAY too short to reach, let alone secure, the bridge. I ended up in my junk drawer where I found one 3/8" long screw that finally did the trick.NOTE: The Beard cone is taller than the EOM cone, so you have to take a LOT of bridge off. I ended up with nearly 3/8" cut off the new bridge.That being said, the sound is VASTLY improved.
YOU WANT THIS ONE!!!! By THOMAS AIKEN from Portland, OR Wednesday, April 22, 2020 Verified Buyer IF YOU PLAY A NATIONAL, OR A REPUBLIC , OR ANY STANDARD size or even parlor size reso guitar, with a 9 and a half inch cone..this BISCUIT BRIDGE WILL DO IT FOR YOU..IT is NOT a NATIONAL (with LOGO on IT).. BISCUIT BRIDGE.... IT IS A NATIONAL STYLE BISCUIT BRIDGE...i have both, and this one is just as good as the National brand, if not BETTER (DO not ) TRY to remove the saddle from this biscuit, it is PAINTED ,and probably Glued together DO all your WORK from the TOP.....and for you cats WHO LIKE the high ACTION ,THIS is the ONE FOR YOU .. IT COMES HIGHER THEN THE NATIONAL BRAND... BUT CAN EASILY be sanded down 180 grit is recommended, 150 works just fine ....GOOD LUCK.....
Maple Biscuit-Bridge By dennis smith from Newark, DE Saturday, June 22, 2019 Verified Buyer Good as it should be. Fast delivery. On the bench waiting for a cut down, to size and install.
Good quality just didn't fit my need. By Steve from Little Egg Harbor Twp, NJ Monday, July 16, 2018 Verified Buyer Well made,appears to be maple. Insufficient biscuit height/slot depth for a bar piezoelectric install, even if the bridge piece was removable.
Biscuit. By Bob Lewis from Van Buren, AR Wednesday, August 23, 2017 Verified Buyer It fit perfect. :) well made. Made my old Supro folk star sing again.
Replacement reso bridge By Todd Roth from Austin, TX Saturday, April 15, 2017 Verified Buyer The maple was easy to work with, everything fit well, except the cone that I used I needed a longer mounting screw.
Replaced By Phil from Bend, OR Sunday, April 2, 2017 Verified Buyer Replaced the biscuit bridge that came with a Gretsch 9240 Alligator Round Neck. I feel that thiis maple biscuit bridge is a definite step up in quality from the Gretsch OEM biscuit bridge. Saddle sanded down and slotted very well. Attachment screw was included. Biscuit had center hole pre-drilled and the pre-drilled hole was centered properly. The bridge was definitely more stable than the OEM part it replaced (i.e., when one string is detuned, the detuning had less effect on the other strings). Overall, I was impressed with the quality of this part.
like it By John from Healdsburg, CA Friday, February 12, 2016 Verified Buyer This was perfect for setting up my republic. Having a slight tilt backwards allowed me to get the intonation I needed. Needs to be carved for your instrument...
Biscuit bridge By Christopher Fouke from Benton Friday, May 8, 2015 Verified Buyer This is a great quality piece!