Please see our COVID-19 Statement
Camless Clamp

Camless Clamp

Camless Clamp Small - 4-1/2" throat

Small - 4-1/2" throat

Item # 3708
Due 1+ month
Email when in stock

$25.62

12 or more $21.78
Camless Clamp Large - 8-1/2" throat

Large - 8-1/2" throat

Item # 3709
In stock, ready to ship!

$27.53

12 or more $23.40
+
 
Total:
Qty:
Scroll to Top

Camless Clamp

About This Item

Special clamps for tight spots! Space-saving wooden clamps for controlled clamping pressure.

Here's a solution when multiple cam clamps must be closely spaced around a curved edge, and the cam levers interfere with each other: we've simply replaced the cam lever with a thumbscrew. A camless clamp!

The camless clamp allows tighter placement with easier operation and finer control of clamping pressure.

These high quality clamps are made of hardwood and steel, for years of daily use. The jaws have protective cork lining. The small clamp has 4-1/2" (114.3mm) depth; the large clamp is 8-1/2" (215.90mm) deep. Both sizes open to 8-1/4" (209.55mm) and have a width of 15/16" (23.81mm).


CALIFORNIA PROPOSITION 65 WARNING
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.


Customer Reviews

  • Excellent
  • Good
  • Average
  • Fair
  • Poor
Write a review
5.0
  • 4.77 average rating from 13 reviews
Sort by
5.0

Good Clamps for large, delicate projects

By

Verified Buyer


High quality and well made. Work well for use in architectural/hobby model construction.

5.0

excellent quality

By

Verified Buyer


I'm a woodworker and need long-reach clamps on occasion. These fit the bill. Their clamping pressure is quite low compared to standard clamps, but for some jobs they're perfectly adequate.

5.0

great clamps

By

Verified Buyer


As with all stewmac tools, always the highest quality.

5.0

Need A bigger knob

By

Verified Buyer


These things work very well. The need a larger head on the screw so you can spin the screw up & down and get more control of the clamping pressure. I have about 20 and they are good with the stock knob; they are great with a 2 inch knob.

2.0

Adequate

By

Verified Buyer


Okay, that works. Doesn't give quite as much clamping power as the box clamps I made. I think the split top may be the reason -- if you were to make the top solid with the upper clamping screw going all the way through you'd get a stronger clamp.

5.0

Great clamp

By

Verified Buyer


I bought 18 of these and they work great. I had to handle them carefully due to their larger size but once you get the hang of it it's easy.

5.0

big and wide

By

Verified Buyer


These work great when you need a larger clamp opening and a longer reach at the same time. Even though I have many, many styles and sizes of clamps I still found uses when only the large 8 1/2" throat camless clamps worked.

5.0

Carless clamps. Excellent for guitar building

By

Verified Buyer


I bought 3 carless clamps for use when glueing tops and backs to my guitars. I have many cam clamps but these apply plenty of clamping pressure plus allowing for more clamps. Absolutely love them.

5.0

These clamps fit in tight places as well as near edges.

By

Verified Buyer


I first bought a set of four (4) large Camless Clamps to complement my set of six (6) used 6" cam clamps passed along to me by another guitar builder. I also had purchased two (2) large and two (2) small German cam clamps from another supplier for brace gluing/clamping. But when faced with gluing the lower bout back braces on a curly maple jumbo back, I didn't want to have the long cam clamp bodies hanging off the back plate while the TiteBond dried. I chose to postpone my gluing operation until the four (4) new small Camless clamps arrived by mail. They were very helpful in securing a tight glue joint at the ends of the braces without being overly heavy and unwieldy at the edge of the back plate. The old craftsman's adage remains true: "You can't have too many clamps." -- G.J. Link

5.0

Really great!

By

Verified Buyer


I've become a huge fan of these camless clamps. You can dial in the exact pressure which is an excellent improvement on the original cam lamp design. Using them for all sorts of repairs and projects in my shop.

Showing 10 of 13 Read more reviews >>