Please see our COVID-19 Statement
Fret Press Caul

Fret Press Caul

Fret Press Caul

Item # 4366
In stock, ready to ship!

$53.83

+
 
Total:
Qty:
Scroll to Top

Fret Press Caul

About This Item

Use your drill press! Our self-leveling steel fretting caul has a 3/8" shank to fit your shop arbor press or your drill press.

Fit with your choice of radius brass inserts: Fret Press Inserts


CALIFORNIA PROPOSITION 65 WARNING
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.


Customer Reviews

  • Excellent
  • Good
  • Average
  • Fair
  • Poor
Write a review
5.0
  • 4.87 average rating from 82 reviews
Sort by
5.0

You have to think about more than this piece...

By

Verified Buyer


I’m refretting an acoustic, and my Jaws fret press pliers only worked up to the 9th fret. I decided to use the drill press and this caul, which also required designing a platform to support the guitar that would allow it to be moved as the frets went in, some kind of jack to back the unsupported fingerboard tongue on the top of the guitar, and my tall Stew Mac neck support block. Once I had all that figured out, everything went smoothly.

5.0

What took me so long

By

Verified Buyer


They say tools expedite the process, and this fret press caul, matched with the radiused inserts, does just that.

5.0

Handy to have.

By

Verified Buyer


I was able to put it in the drill press and put it on vice grips to make jaws with it. I’m very happy with this well made tool.

5.0

One way to install frets

By

Verified Buyer


This is a well manufactured part. I modified a 1 ton press to use in my last fret job. All the frets were level except for one and I probably had some dust in the slot before I used the press.

5.0

Should have invested a long time ago

By

Verified Buyer


I was hammering frets, it works but not nearly as smooth as this. I just chuck it up in my drill press.

4.0

Great Tool

By

Verified Buyer


I wish I had quit hammering frets earlier. This tool does the job much better and a lot less violently. The resultant fret job looks much better too. The frets don't have that slightly battered look and come out perfectly smooth. My only quibble is the price.

5.0

Parts

By

Verified Buyer


well made

5.0

Only way to insert fret wire

By

Verified Buyer


Using this caul in my arbor press has been a life saver when it comes to my ukulele builds. The wires go in uniformly with absolutely no damage to the fret board. This tool has been a godsend for me.

5.0

fret press caul

By

Verified Buyer


I used my own arbor press and cinched my frets into the slots.

1.0

Non leveling Press

By

Verified Buyer


Fretting a Flat new Rosewood Fingerboard resulted in random fret depths in the order of 10-15 thousandths side to side on 40% of the frets. The Fret press caul was used with a similar press to the SM #4480, with a Steel flat plate under the fingerboard with the steel plate resting on the extended level feet off the press. The fingerboard was centered under the shaft of the press and the frets were fully pressed into the fingerboard.
The result was uneven seating , fret to fret and side to side.
I have had to remove and reset about 40% of the frets and redo them by hammering them in.

I would not recommend this tool.

Showing 10 of 82 Read more reviews >>