Rectangular PVC gloss-surface plastic sheets for custom-cutting pickguards. Rectangular sheets are 11-1/4" x 19-1/8" (285mm x 485mm). CALIFORNIA PROPOSITION 65 WARNING WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Exactly what I needed By Adam from Boylston, MA Sunday, February 28, 2021 Verified Buyer I destroyed a customer's truss rod cover on a 70s import acoustic. This material was the exact stuff I needed to make a replacement.
Good quality product By charlie arnet from Gresham, OR Wednesday, January 6, 2021 Verified Buyer Good size and easy to cut and drill. Shinny side protected with a thin plastic sheet.
Right sized guard easy peasy! By Michael Pansius from Sacramento, CA Tuesday, October 27, 2020 Shrunken and lifting pic guard on my 1972 Martin D-18 was a dilemma. I could pay a luthier OR as woodwork is a hobby, do it myself. After watching a few videos, I can do this! So I did, lacquered the bare wood beneath, smoothed it to match the finish. I found a dreadnaught sized pic guard at a local shop -- close but not close enough. Found the classic dreadnaught guard available at Stew Mac and it was perfect save for a little long on one side, nothing a little sandpaper couldn't fix. Good material, quick delivery. Very pleased with Stew Mac!
Great to keep on hand By kendall johnson from Lincoln, NE Wednesday, October 7, 2020 Verified Buyer needed to make a rear electronics cover. worked very well. plenty to keep on hand for like type covers. one sheet is enough for a pick guard as well. poly mask protected and stays on while machining.
I was very disappointed in the beginning By Michael Beck from Reedsport, OR Thursday, September 24, 2020 Verified Buyer The material looked marred and scuffed so I had my wife wash it to clean it up and see if it was just on the surface or if it was deep in the material. She cleaned it and it didn't improve the look enough to make me happy. We talked about it and I said when I used to work in a machine shop we used to get high quality plastic and we would do our project and when we were done we would peel off the protective layer and it would be a shiny beautiful project. Then she and her finger nails went to work on the edges looking for a covering and guess what, it has a protective coating and when you peel it back it is beautiful and shiny new. I am old and the eye's aren't what they used to be, she didn't see the protective cover either but found it by feel. Glad I purchased this material it will finish my guitar project nicely with a beautiful black high gloss shine.
Exactly what it says it is and high quality. By Jeremiah Johnson from Saint Louis, MO Wednesday, May 20, 2020 Verified Buyer Perfect for making your own pickguards. High quality.
Great quality pickguard material . By Randy Koch from Omaha, NE Wednesday, April 22, 2020 Verified Buyer I purchased one of these blanks , to cut a pickguard out that I couldn't buy from any suppliers . My first try was pretty good and looks fine and the second will be much better . These pickguard blanks are very good quality and worth buying .
Good stuff cheap!!!!! By george scarlett from Blue Ridge, GA Friday, January 10, 2020 Verified Buyer Good choice, and even had the SAME "Made In Kolea" sticker on the back, as did the original! LOL!
Appears to be up to the job By Byron Stafford from Show Low, AZ Monday, October 7, 2019 Verified Buyer I used this to make black control cavity covers for a StewMac LP kit. I didn't care for the cream colored ones, like those Gibson uses, that came with it. I rough-cut them with a pull-saw. Then I did something I saw Dan Erlewine do to shape pickup mounting rings to a Les Paul body. I used a pair of side-cutters (he used fret nippers which I also have) to "nibble the shape almost to the outline. Then I sanded it with 600 grit. A little time consuming but - slow and easy wins the race. The result? Excellent. The plastic is a little softer than I would have liked so it is likely to be scratched up in use easier than I would like too. I'll have to wait and see. So far, I like it a lot.