Please see our COVID-19 Statement
StewMac Pre-Cut Wide Fretwire Set

StewMac Pre-Cut Wide Fretwire Set

Wide 0.110" width
Favored for string bending—used on many modern electric guitars and basses. (Late '50s Gibson® 0.098" jumbo fretwire is medium by modern standards.)

Get fretting NOW with Pre-Cut and Pre-Radiused fretwire
In a busy shop time is money, especially when it comes to fretting. That's why using our pre-cut and pre-radiused fretwire will make your fretting faster, easier, and more profitable. And—it's pre-cleaned too!


from $22.00MIX + SAVE

Add to Cart Below

For electric guitar or bass. Modern "jumbo" fretwire used on ESP, Jackson, Ibanez, Kramer and similar guitars.

Wide/Highest, 7.25" Radius, 24-pieces

Item # 0150-PC-7
In stock, ready to ship!

$22.00

3 or more $18.70
+

Wide/Highest, 12" Radius, 24-pieces

Item # 0150-PC-12
In stock, ready to ship!

$22.00

3 or more $18.70
+

Wide/Highest, 16" Radius, 24-pieces

Item # 0150-PC-16
In stock, ready to ship!

$22.00

3 or more $18.70
+

Unique pyramid profile for electric guitar or bass. A little extra height, and a unique profile with sloped sides.

Wide/Pyramid, 7.25" Radius, 24-pieces

Item # 0158-PC-7
In stock, ready to ship!

$24.20

3 or more $20.57
+

Wide/Pyramid, 12" Radius, 24-pieces

Item # 0158-PC-12
In stock, ready to ship!

$24.20

3 or more $20.57
+

Wide/Pyramid, 16" Radius, 24-pieces

Item # 0158-PC-16
In stock, ready to ship!

$24.20

3 or more $20.57
+
 
Total:
Qty:
Scroll to Top

StewMac Pre-Cut Wide Fretwire Set

About This Item

Wide 0.110" width
Favored for string bending—used on many modern electric guitars and basses. (Late '50s Gibson® 0.098" jumbo fretwire is medium by modern standards.)

Get fretting NOW with Pre-Cut and Pre-Radiused fretwire
In a busy shop time is money, especially when it comes to fretting. That's why using our pre-cut and pre-radiused fretwire will make your fretting faster, easier, and more profitable. And—it's pre-cleaned too!

Just imagine having a drawer of perfectly pre-cut, pre-radiused frets all ready to go for your next fret job.

    Ready to use high quality frets
  • Pack of 24 pre-cut frets
  • Pre-cleaned
  • Pre-radiused to 7.25", 12" or 16"
  • Wide 0.110" width
  • Choose standard or pyramid profile
  • Each fret is 2.75" (70mm) long
  • Two crown heights, 0.052" or 0.053"
  • Traditional 18% nickel-silver material

Fretwire you know and trust
Instrument makers and repair shops have relied on our fretwire for years for its high quality material, well made form, and consistent tolerances. We use the best 18% nickel-silver alloy on the market for our frets. It's hard, durable, and stays put in the fretboard.

Start fretting faster than ever before!

Need more fretwire? We also sell by two foot lengths and by the pound as well. Click here to buy in bulk.

Our fretwire is sized to fit a 0.023" (0.58mm) fret slot width.

Fretwire is made in a variety of crown heights. Note that after the frets are installed and leveled, they can lose from 0.004" to 0.010" in height.



CALIFORNIA PROPOSITION 65 WARNING
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.


Customer Reviews

  • Excellent
  • Good
  • Average
  • Fair
  • Poor
Write a review
5.0
  • 5.00 average rating from 6 reviews
Sort by
5.0

Pre=Cut fret wire

By

Verified Buyer


everything worked out good. I corrected the 12in radius of the neck cleaned the fret slots, then I worked a little off the normel way of freting by finishing the fret ends before installing them ? I made the caul and used the drillpress to press the frets in. gave them a little rap on the caul to make sure no hang-up of the frets. One little thing I noticed? the frets seamed to have a twist to them as delivered? you can`t see it offhand but I made a ( Handle) I call it? to make working on them easer by cutting a slot in a short piece of wood scrap,. puting the fret in the slot to work on I noticed it seamed to not look right? when turning the fret end for end it`s easy to notice the twist. I think the cutter is causing it ? didn`t bother me any ,when trimming the end`s a little it`s ok. thanks to you guys ! !

5.0

Precut frets

By

Verified Buyer


Awesome product

5.0

My First

By

Verified Buyer


I purchased these for my first ever fret job on an Ibanez SR705 5 string bass. I bought the bass for 50 dollars because it not only had 2 breaks in the headstock, it had a finger break at about the 5th fret, and the fretboard cracked. I had to remove all the frets after fixing the breaks, and sand the rise out of the fretboard (I couldn't get it to come off no matter how much heat I applied!!!) and re-fret the neck! These (with StuMac's guidance) frets were perfect! They were an easy leveling and re-crowning (StuMac files of course) and now all I have to do is tweak a few things and this. bass will again rock with all my others! StuMac made a very difficult job easy!

5.0

Perfect fit

By

Verified Buyer


This was my first fretboard. I had some issues with my slots, but these frets fit so well it made it easy to correct my issues. I'll definitely order these in my next build.

Stew Mac can be pricey, but the price of these pre radiuses and cut fret wires were in line with anywhere else, so the value of them, knowing that STEW Mac will back up their products makes it a no brainier. Buy these.

5.0

Nice quality, makes installing a breeze

By

Verified Buyer


I got these because I only have a fret hammer and I have to say I am really surprised how fast I got fret installation finished. Only a couple hits and they were stuck with a nice tight fit. Will definitely be purchasing next time

5.0

i used these on my Strat, worked great.

By

Verified Buyer


A1