Golden Age Pre-wired Harness for Gibson® SG® with Push-pull Pots
Make your Gibson® SG® more versatile! Our pre-wired harness with push-pull pots splits the coils of humbuckers for single-coil operation. For humbucking pickups with series link access (3 wire, 5 wire, etc).
Golden Age harnesses are assembled and soldered in the USA using top components, including Switchcraft switches and CTS pots for the best sound. Ready to drop into your guitar!
-
Worth every penny!
- Premium hand-wired for drop-in retrofit
- Upgrade your old wiring
- Save work and save time on new builds
Soldered in our Athens, Ohio shop
We professionally hand-soldered these harnesses using the best brand-name components for long life and great sound: CTS pots, Orange Drop® caps, Switchcraft™ toggle switch and output jack and cloth push-back wire.
Tested and 100% Guaranteed
Each Golden Age harness comes to you mounted on a reusable plywood template, which is a tool in itself: save it for future wiring jobs. The template holds the components correctly so the finished harness fits neatly into the guitar's wiring cavity. You simply solder your pickup lead wires to the harness.
Got questions? Call or email us. A friendly gearhead will be happy to help!
| Qty | Specs | |||
| 1 | Switchcraft long-thread output jack | |||
| 2 | .022uF Orange Drop Caps | |||
| 1 | Switch knob (amber) | |||
| 1 | Switchcraft 3-way right-angle switch | |||
| Switch length | 2" | (50.80mm) | ||
| Threaded portion | 3/16" | (4.76mm) | ||
| Required mounting hole dia. | 1/2" | (12.70mm) | ||
| Required body cavity depth | 13/16" | (20.64mm) | ||
| Requires at least 1-3/4" (44.45mm) from the center of the mounting hole to the edge of the control cavity for wiring clearance. | ||||
| 2 | CTS 500K-ohm control pots | |||
| Shaft diameter | 0.235" (5.95mm) split shaft, fine knurling |
|||
| Thread | 3/8" x 32 | |||
| Threaded portion | 3/8" | (9.52mm) | ||
| Required mounting hole diameter | 3/8" | (9.52mm) | ||
| 2 | CTS Push-pull SPST 500K-ohm control pots | |||
| Shaft diameter | 0.235" (5.95mm) split shaft, fine knurling |
|||
| Thread | 3/8" x 32 | |||
| Threaded portion | 3/8" | (9.52mm) | ||
| Required mounting hole diameter | 3/8" | (9.52mm) | ||
| Required cavity depth | 1-3/16” | (30.16mm) | ||
