Please see our COVID-19 Statement
Conductive Copper Tape

Conductive Copper Tape

Conductive Copper Tape 2"  wide

2" wide

Item # 0028
In stock, ready to ship!

$23.34

+
Conductive Copper Tape 3/4" wide

3/4" wide

Item # 0037
In stock, ready to ship!

$15.27

+
Conductive Copper Tape 1/4" wide

1/4" wide

Item # 0036
In stock, ready to ship!

$6.09

+
Conductive Copper Tape, Set of 3

Set of 3

Item # 0038
In stock, ready to ship!

List Price $44.70
Your Price $39.78

+
 
Total:
Qty:
Scroll to Top

Conductive Copper Tape

About This Item

Get rid of buzz and interference in your guitar.
Shield pickups and control cavities with this self-adhesive copper tape.

180" rolls for shielding pickups and control cavities to reduce hum, noise and radio interference. The self-adhesive backing is also conductive, so overlapped seams are electrically continuous. Wrap this tape around pickup coils for additional shielding.

Sold individually or SAVE when you buy the set of all three widths.

Conductive Copper Tape surface accepts solder.

Item Width Thickness Length
#0028 2" (50.80mm) .00125" (0.032mm, 1.25 mil) 180" (4.57m)
#0037 3/4" (19.05mm) .00125" (0.032mm, 1.25 mil) 180" (4.57m)
#0036 1/4" (6.35mm) .00125" (0.032mm, 1.25 mil) 180" (4.57m)

For quicker shielding in small, hard to reach areas, use our Conductive Shielding Paint. Also available: our Shielding Kit contains the materials for shielding one guitar.


CALIFORNIA PROPOSITION 65 WARNING
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.


Trade Secrets!

Trade Secrets!

Single-coil buzzkill: the why and how of electric guitar shielding.

Erick Coleman talks about the causes of buzzes and electrical noise, and how to beat them.

Customer Reviews

  • Excellent
  • Good
  • Average
  • Fair
  • Poor
Write a review
5.0
  • 4.87 average rating from 204 reviews
Sort by
4.0

Copper shielding tape

By

Verified Buyer


Easier to work with than I had anticipated. The only reason I gave 4 instead of 5 stars is that I shielded everything pretty completely, including the back of the pickguard, and even soldered wires between the different cavities and measured 0 ohms everywhere, but still my single coils generate some noticeable hum by themselves. I didn't measure it before shielding, so I don't know whether it's better or not, but it's not dead quiet.

2.0

It does the job... with caveats...

By

Verified Buyer


I like to use shielding tape in my control cavities.... This tape is very thin and tears easily as compared to other thicker tapes I've used and it's adhesive is not conductive and loses it's stickiness with just a little handling... So the product works in application and is easy to shape, however, I will look elsewhere for my next purchase of shielding tape.

5.0

Good stuff

By

Verified Buyer


Slightly difficult to use as I had heard (this was my first shielding experience) but I'd say the results were well worth the effort!
Not as intimidating as it seems

4.0

works well but watch those edges

By

Verified Buyer


This type works as advertised. It adheres well and seems to do the job. My only advice in particular is, when you're cutting a piece of tape off of the roll, watch the tape edges -- they're sharp, and gave me a deeper cut on my finger than just your usual paper cut. So be careful. But it sure seems like a good product.

5.0

Super easy to apply!

By

Verified Buyer


This stuff is great! Peels easy, applies cleanly, and overlapping pieces don't bunch at all. I shielded the interior of a Fender Jaguar pretty quickly (3/4" roll) and now it's silent and I'm psyched!

Would highly recommend this as a necessity for the shop, I'll be working this into every guitar from here on out!

5.0

Really good amount of tape

By

Verified Buyer


I bought this to shield a p bass and have plenty to do a few more basses. Really fun to work with. It was easy to get continuity through the control cavity and solder to ground. When I eventually run out, I’ll buy another.

5.0

Great product

By

Verified Buyer


I have successfully used this product to eliminate and reduce shielding issues for several guitars.

5.0

Perfect to quiet buzzing

By

Verified Buyer


My bass would buzz/hum when playing at certain venues. I took the pick guard off, put this tape inside the cavity and the back of the pick guard, and viola! The noise was gone! Does what it promises.

5.0

Still planning to use it

By

Verified Buyer


I bought this for my Bullet Strat which hummed more than I would like. It is important to watch the videos from Stewmac or YouTube to apply it correctly with grounding. When I change my strings the next time, I will put it on.

5.0

Still planning to use it

By

Verified Buyer


I bought this copper tape to shield the pickup cavities on my Bullet Stratocaster, which hum more than I would like. It is important to watch the Stewmac and YouTube videos on how to do this correctly with proper grounding. When I am ready to change the strings, I will shield the cavities.

Showing 10 of 204 Read more reviews >>