Standard Wiring Kit for Telecaster
Here's what you need for wiring those pickups into your Tele®!
All the parts you'll need, plus a diagram to show you how.
-
Standard Wiring Kit for Telecaster includes
- Output jack
- 250K Alpha control pots (2)
- Ceramic capacitors: .047uF and .001uF
- CRL Lever Switch: 3-way with mounting screws
- Switch knobs: black barrel and top-hat knobs included
- Non-shielded PVC-insulated circuit wire: 22 AWG, white, 12" long
- Non-shielded PVC-insulated circuit wire: 22 AWG, black, 24" long
- Shielded guitar circuit wire: 26 AWG black, 12" long
- Wiring diagram
| Shaft diameter | 6mm split shaft, coarse knurling | |
| Thread | M8 x 0.75 | |
| Threaded portion height | 3/8" | (9.52mm) |
| Required mounting hole diameter | 5/16" | (7.94mm) |
Switch specifications
| Body cavity depth required | 1-3/8" (34.93mm) |
| Mounting screw spacing | 1-5/8" (41.28mm) |
| Lever stem | .052" x .188" (1.32mm x 4.78mm) |
| Pickguard slot required | 1/16" x 1-1/16" (1.59mm x 26.99mm) |
Telecaster®, Tele®, and Esquire® are registered trademarks of Fender Musical Instruments Corporation.
