Please see our COVID-19 Statement
Fret Crimper

Fret Crimper

Fret Crimper

Item # 4900
In stock, ready to ship!

$101.04

+
 
Total:
Qty:
Scroll to Top

Fret Crimper

About This Item

Crimps the tang to fit oversize fret slots. Hardened steel jaws press slight scallops into a fret tang to fit an oversize slot.

Works on a variety of slot widths. Simply vary the pressure as needed.

Overall length: 7" (178mm)
Jaw width: 13/32" (10.24mm)
Comfortable rubber-coated handles.

This unique tool is based on a technique developed by repairman Frank Ford.

The Fret Crimper is included in our money-saving Fret Tang Tool Set along with the Fret Barber, our handy tool for quickly trimming the barbs on longer lengths of fretwire.

We recommend our book FretWork Step By Step for details on the technique of compression fretting.

Works on stainless frets, too!
All of our tools are suitable for use on stainless-steel fretwire*. Modern stainless-steel fretwire is known to be harder than the traditional nickel-silver blends, but our own shop experience indicates the wire does not cause premature wear of files or sandpapers.
*Excludes our original Fret Tang Nippers. We recommend our Deluxe Fret Tang Nippers for stainless-steel fretwire.



CALIFORNIA PROPOSITION 65 WARNING
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.


Trade Secrets!

Trade Secrets!

When frets don't fit the slot, resize the fret tang

This week, Dan Erlewine's pumping iron (nickel steel, actually!) He's showing how to bulk up your skinny fretwire and slim down your fat fretwire.

Customer Reviews

  • Excellent
  • Good
  • Average
  • Fair
  • Poor
Write a review
4.5
  • 4.40 average rating from 25 reviews
Sort by
5.0

works well on jumbo stainless

By

Verified Buyer


works well on jumbo stainless

5.0

Only Tool For The Job

By

Verified Buyer


Literally, this is the only tool which increases the profile of a fret tang. I searched online and asked the FB community; this is it. Which is why SM charges what they do for glorified pliers. My suggestion: bite the bullet and buy it if you need it. As far as using it, it's straightforward: there's a cavity for the fretwire, and the crimper surface for the tang... just make sure the tang is flat in its space, because it's possible to put it in at an angle, which won't crimp correctly. I used it with EVO Gold wire, expecting issues due to the fretwire's hardness. Absolutely no problem. Again, buy it if you need it. There is nothing else out there

5.0

Very effective

By

Verified Buyer


This really helps those frets seat on a board that's been refretted before. Expensive, but very helpful!

5.0

Great for fret work

By

Verified Buyer


For refret work is best tool. It works lose fret grooves.

5.0

No more glue on refret jobs!!

By

Verified Buyer


This is the first time I leave a review. I need to tell you that if you still don’t have this tool in your shop you are doing it all wrong. The frets won’t move even in an earthquake, dude!!! DO NOT HESITATE TO BUY THIS. Armand from Armand’s Guitar Repair Shop in Buenos Aires.

4.0

Not bad, but...

By

Verified Buyer


Handy for making narrow tangs "fit" wide or worn fret slots. However, it could be improved upon by making it spring loaded so you don't have to manually reopen it after each crimp.

5.0

Handy tool

By

Verified Buyer


For those that still drive frets caveman style, with a hammer, this tool is really great. I usually press my frets in, but some occasions call for having to drive a fret or 2. By crimping the ends of the fret tang slightly, and over bending it a little, you can tap the fret ends in and they won't pop out when you drive the rest of the fret in. Glad I actually found a use for this slightly expensive tool!

5.0

Excellent tool

By

Verified Buyer


I bought this fret crimper because my fret slot was to wide for my new stainless steel frets. They did exactly what they’re supposed to do with no problem whatsoever. Great tool and fixed my problem easily.

1.0

What you see is not what you get!

By

Verified Buyer


Simply put, the tool I got is not what's pictured and described in the literature.
I bought this tool after checking out the pics and reading the stuff about how Dan likes to crimp his frets to widen them then flatten the ends so they go in easily. This is not possible with this tool because it no longer has the part to flatten things. That's half the reason to buy this tool. Sadly, I can't find this tool anywhere else so I'm kind of stuck.

I'm really not thrilled about this. I can't get behind a company that ships something different than they advertise - especially for an $80 fricking tool!!!
WTF Stewmac??? (see pics)

(Yes, of course the tool works and is of decent quality. That's not what this review is about.)

Response from StewMac


We have our Web Team working on getting the picture updated and we have sent out a prepaid label for the return of this item. We are very sorry if you felt misled by our marketing materials and are happy to honor our 100% satisfaction guarantee. - Spencer, Customer Support

5.0

great!

By

Verified Buyer


A great little tool. i wish i had seen this earlier. Would be better if it was just a little wider in the jaws, but still a great tool.

Showing 10 of 25 Read more reviews >>