Please see our COVID-19 Statement
Saddlematic

Saddlematic

Saddlematic

Item # 4462
In stock, ready to ship!

$57.56

+
 
Total:
Qty:
Scroll to Top

Saddlematic

About This Item

A real time saver! This unique aluminum/steel tool quickly and accurately finds the correct location for an acoustic guitar saddle slot.

Use the Saddlematic to position a new slotted bridge, or check the accuracy of an attached bridge and saddle. It adjusts for most acoustic guitar scale lengths up to 27".

Quickly and accurately finds the correct location for a new acoustic guitar saddle slot, for positioning a new slotted bridge, or for checking the accuracy of an attached bridge and saddle. It adjusts for most acoustic guitar scale lengths up to 27".

Saddle location pins can be set for proper scale length compensation, and for left-hand bridges. Aluminum/steel construction with set screws.

Quick and accurate way to find the correct location for a bridge saddle
Locate the the saddle slot position on a new bridge blank
Precisely place a new bridge with a pre-cut saddle slot
Check the accuracy of an existing saddle
Record the saddle location before removing a bridge for repair
Works with the strings on or off!


CALIFORNIA PROPOSITION 65 WARNING
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.


Instructions

Product Instructions

Finding saddle location with the Saddlematic

How to find saddle placement location with the Saddlematic.

Customer Reviews

  • Excellent
  • Good
  • Average
  • Fair
  • Poor
Write a review
4.5
  • 4.63 average rating from 35 reviews
Sort by
4.0

A great tool, with one or two caveats

By

Verified Buyer


I really like this tool, and it’s “almost” perfect.... but...
1) the “pointers” really need to be bent at 90 degrees. Mine weren’t. Makes a difference.
2) it’s a bit cumbersome to set the pointers, some jiggling and fumbling are involved to get it right
3) the directions give you generic measurements to the FRONT of the saddle slot. IF you use the StewMac fret calculator, those measurements are to the “break angle”, basically the CENTER of the saddle. With a 1/8” saddle, these measurements are 1/16” different. Significant. Just keep that in mind. (Note that one is StewMac’s photos shows the measurement to the break angle). A bit of consistency on StewMac’s part would be nice!

Other than that, nice n easy and reasonable cost!

5.0

Thanks StewMac

By

Verified Buyer


Carrier messed up the shippment to Germany and "lost" the sending, but StewMac fixed with time-warp-speed-of-light replacement. THX again!

5.0

Saddlematic

By

Verified Buyer


Excellent special purpose product. As typical, StewMac service was prompt and courteous.

5.0

Versatile tool

By

Verified Buyer


Its a great tool. I have had it for several years and used it to build classical, acoustic steel string, electric guitars, and ukuleles. It easily adjusts to different scale lengths. The intonation pins are a tricky to adjust but they are very useful once they are set for a particular scale length.

4.0

Great tool, but needs a little improvement...

By

Verified Buyer


StewMac made a great tool (and at a reasonable price), and they make compensation calculations very easy on their website. What bothers me, though, is requiring a 2mm Allen key to adjust the compensation needles. The Allen key is included (which I appreciate) but I would prefer a thumb screw to adjust easily and accordingly, as I find myself changing it as I repair and intonate a wide variety of instruments.

5.0

works like a charm

By

Verified Buyer


I do have friends who borrower a strobe tuner and fine tune the exact string length to exhausting detail. But for just getting a pre-compensated treble/bass string balance and getting the strings the perfect length to stay in tune at all frets, this instrument was very exacting and easy to use. with tape measures, there is always a little wiggle room or question of accuracy as to where exact -0- is.

5.0

Get it right the 1st time

By

Verified Buyer


Built a StewMac Dead Kit and followed the instructions for correct bridge placement. When I finish the guitar and started playing it I found the intonation to be off. I removed the bridge, plugged the bridge pin holes and re position the bridge. I wanted to make sure I had it right and the Saddlematic was spot on. Plays and sounds great now.

5.0

Great tool!

By

Verified Buyer


The saddlematic told me right away what I needed to do, love it.

4.0

locates ...

By

Verified Buyer


this little tool DOES get your scale length correct HOWEVER you really have to be careful to get the bridge square to the finger board. It is easy for something to get tilted a little bit and throw the centerline off. SO.. yes it does locate the saddle. just be mindful that you'll need to square things up too. After 10 guitars I would buy this again

5.0

Saddlematic

By

Verified Buyer


Works great

Showing 10 of 35 Read more reviews >>