Pickup Kit for Jazz Bass
Build your own pickups for the classic Jazz Bass® sound, or wind them your own way for custom output and tone.
This kit contains the vintage-spec parts you'll need for making bridge and neck position pickups. Alnico 5 magnets produce a bright tone with a tight low end and stinging highs.
Pickup Kit for Jazz Bass includes
- Black fiber bobbin flatwork
- Alnico 5 polepieces ready to magnetize (instructions included)
- Black, white and yellow push-back wire
- Compressible foam strips for height adjustment
- Mounting screws
- Black plastic covers
Bridge Pickup for Jazz Bass
|
|
||||
| Cover dimensions (minus mounting tabs) |
3-11/16" x 11/16" x 3/4" tall (93.66mm x 17.46mm x 19.05mm) |
|||
|
|
||||
| Mounting screw spacing | 1-9/16" x 15/16" (39.69mm x 23.81mm) | |||
|
|
||||
| String spread | 2-5/16" (58.74mm) | |||
|
|
||||
Neck Pickup for Jazz Bass
Note: Jazz Bass pickup dimensions have varied slightly over the years. Please measure your pickup cavities before replacing older pickups.
|
|
|
| Cover dimensions (minus mounting tabs) |
3-9/16" x 11/16" x 3/4" tall (90.49mm x 17.46mm x 19.05mm) |
|
|
|
| Mounting screw spacing | 1-1/2" x 15/16" (39.10mm x 23.81mm) |
|
|
|
| String spread | 2-3/16" (55.56mm) |
|
|
|
| Polepiece dimensions | .781" tall x .195" dia. (19.84mm x 4.95mm) |
|
|
|
