Fret Setter
Reseat loose fret ends without restringing! Simply fit end of this handy tool over the crown of a fret, and tap with a hammer.
The end of this 5"-long brass tool fits over the crown of a fret, and its slim 3/8" contact surface reseats loose fret ends fast — there's no need to unstring the instrument. It's also great for hand-pressing a loose fret end down while your superglue sets. Setters are available for jumbo and medium fretwires.Works on stainless frets, too!
All of our tools are suitable for use on stainless-steel fretwire*. Modern stainless-steel fretwire is known to be harder than the traditional nickel-silver blends, but our own shop experience indicates the wire does not cause premature wear of files or sandpapers.
*Excludes our original Fret Tang Nippers. We recommend our Deluxe Fret Tang Nippers for stainless-steel fretwire.
Can you lower a single high fret with just a fret crowning file?
You generally cannot lower a single high fret using just a standard fret crowning file. A fret crowning file is designed to reshape the top of a fret after it has already been leveled flat. Its job is to round off the flat spot left by the leveling process, not to remove significant height from a fret. Using a crowning file alone on a high fret will mostly round the sides, not lower the overall height. If you attempt to use only a traditional crowning file to lower a high fret, you risk removing material unevenly and potentially making the fret unlevel or misshapen. Again, crowning files are not meant for significant material removal from the top of the fret. Instead, use the Fret Kisser which makes quick work of leveling an individual high fret, saving time by working only on the affected fret.