SnufferStick High Voltage Discharge Stick
Safely discharge high voltage when working on amps
Clip the SnufferStick to the chassis for ground, and then hold the tip to your filter caps to discharge dangerous high voltage present when you turn off your amp.
Included are two 56K, 2-watt resistors in series with the nose probe and ground wire (112K total). The SnufferStick will safely discharge the high voltage supply within three to five seconds. We highly recommend using a meter to measure the voltage while you have the discharge stick in place. Only remove the stick when the voltage is completely drained.
Don't work on an amp without a discharge stick!