Shame I haven't had the chance to use it yet. The project i wanted it for ended having p94s instead

StewMac always has the best

I couldn’t find the perfect fit for my MM pickup at any hardware store. So I decided to check on stewmac and it fits perfectly and good quality!

Take care, it's easy to scrap the head

The mounting screws were exactly what I needed - right size, right length! I bought a low end guitar with P-90 pickups that I replaced with Lindy Fralin P-90s but the mounting screws for the old original pickups were too wide for the Lindy Fralin pickups and they were also too short for proper pickup height. These screws from StewMac are narrower and longer and worked perfectly.

I recently purchased an Epi ES 339 P90 Pro as an open box item... got a great price, but found that the neck pickup had been remounted with shorter black screws and surgical tubing... these matched the factory hardware on the bridge pickup exactly and allowed me to raise the pickup to the height that I wanted...

Two screws, two springs. No more, no less. That's all I needed.

Correct size, and springs were long enough to trim to whatever length I need!

I believe these are a little thicker (or at least the heads are larger) than Jazzmaster pickup mounting screws, but worked just as well for me for that purpose. The springs, obviously weren't needed.

Be sure to use the proper pilot hole bit! Otherwise the nickel heads will strip in a heartbeat.

Wanted to give more of a heads up than a review--if anyone else has purchased a Fender Squire Cabronita and would like to get more height pickup adjustment-these work perfectly--a little trimming to the spring and now i can raise or lower the Fidelitrons.