Rotary Switches
5 and 6-position rotary switches for custom wiring, PRS guitars and Varitone circuits.
5-position:
4-pole switch for Paul Reed Smith® guitars, or other custom wiring and pickup combinations.
| Item# | 3512 |  |
| Configuration | 5-position, 4-pole | |
| Typical use | Pickup selector and custom wiring |
|
| Cavity depth required |
1-5/16" (33.34mm) | |
6-position: 2-pole and 4-pole versions for custom wiring and pickup combinations, such as the Varitone notch filter circuit in Gibson ES-345 and Lucille guitars.
| Item# | 3511 |  |
| Configuration | 6-position, 2-pole | |
| Typical use | Varitone | |
| Cavity depth required |
7/8" (22.23mm) | |
| Item# | 3516 |  |
| Configuration | 6-position, 4-pole | |
| Typical use | Pickup selector, Varitone, and custom wiring |
|
| Cavity depth required |
1-5/16" (33.34mm) | |
Each rotary switch is make-before-break and includes a flat washer, lock washer and two mounting nuts. The coarse-knurled split shaft has M9 x .75 thread; the threaded portion is 3/8" tall (10mm). 3/8"-diameter (10mm) mounting hole is required.
#0526 Chickenhead Knob is available separately to fit these switches.
Paul Reed Smith® and PRS® are trademarks of Paul Reed Smith Guitars.
