Please see our COVID-19 Statement
Slotted Fingerboard for Fender Guitar

Slotted Fingerboard for Fender Guitar

Slotted Fingerboard for Fender Guitar Ebony

Ebony

Item # 1062
In stock, ready to ship!

$57.33

+
Slotted Fingerboard for Fender Guitar Crelicam Ebony

Crelicam Ebony

Item # 1062-CE
In stock, ready to ship!

$54.95

+
Slotted Fingerboard for Fender Guitar Indian Rosewood

Indian Rosewood

Item # 1062-R
In stock, ready to ship!

$32.09

+
Slotted Fingerboard for Fender Guitar Madagascar Rosewood, Master Grade

Madagascar Rosewood, Master Grade

Item # 1062-MMR
In stock, ready to ship!

$76.60

+
Slotted Fingerboard for Fender Guitar Madagascar Rosewood

Madagascar Rosewood

Item # 1062-MR
In stock, ready to ship!

$62.95

+
Slotted Fingerboard for Fender Guitar Maple

Maple

Item # 1062-M
In stock, ready to ship!

$18.40

+
Slotted Fingerboard for Fender Guitar Granadillo

Granadillo

Item # 1062-G
In stock, ready to ship!

$36.68

+
Slotted Fingerboard for Fender Guitar Pau Ferro

Pau Ferro

Item # 1062-PF
In stock, ready to ship!

$31.45

+
Slotted Fingerboard for Fender Guitar Ziricote

Ziricote

Item # 1062-Z
In stock, ready to ship!

$34.95

+
 
Total:
Qty:
Scroll to Top

Slotted Fingerboard for Fender Guitar

About This Item

25.5" scale • 12" radius • 24 slots + nut slot
Each fingerboard is radiused and extended to include a 1/8" flat-bottomed nut slot, Fender style.

Tip: Saw the fingerboard shorter at the 2nd fret (at the nut end) to install it on a Gibson 22-3/4" short scale guitar.

Our kiln-dried fingerboards have flat undersides, are unfretted (no inlays), and ready for trimming to fit a variety of neck widths.

Approximate dimensions: 2-3/8" x 20-3/8" x 15/64" (60.32mm x 517.53mm x 5.95mm)
Radius: 12" (304.80mm)
Fret slots: 24 slots, 0.023" wide (0.58mm). Ready to accept our fretwire.
Nut slot: 1/8" wide (3.18mm)

Important:
Ebony is usually not uniformly black.
We offer Black Fingerboard Stain, as used by Gibson®, Paul Reed Smith® and other makers for darkening the streaks on ebony fingerboards, bridges and peghead overlays.



CALIFORNIA PROPOSITION 65 WARNING
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.


Customer Reviews

  • Excellent
  • Good
  • Average
  • Fair
  • Poor
Write a review
4.5
  • 4.67 average rating from 73 reviews
Sort by
5.0

Excellent Quality

By

Verified Buyer


I hate having to cut for frets and radius, and these are just perfect. I've used the maple and pau ferro FBs, and they shaped up beautifully!

5.0

Recycle those warped necks

By

Verified Buyer


I had this badly warped neck that was destined for the fire pit. I decided to remove the fretboard just so I could see how the truss rod actually works. To my surprise, the rosewood fretboard curved to the left, and the maple sprung back to arrow straight. It seems it was just the rosewood that was warped. I slapped one of these bad boys on and now I got a stable neck with the perfect nut width. Recycling that old neck was much better than paying $300 for an aftermarket replacement neck.

5.0

Saved me a lot of time on my build.

By

Verified Buyer


A simple radius change to 9.5" and the fret job was a breeze. Good quality hard maple too. I'm glad I decided to buy a slotted fret board this time

5.0

Beautiful Piece of Wood

By

Verified Buyer


Thank you for delivering this during some crazy times! It's made my life much better!

5.0

 Maple Fingerboard

By

Verified Buyer


Nice product!! Exactly what I needed!! Thank you!

5.0

4A Madagascar Rosewood sloted fretboard

By

Verified Buyer


After receiving my package in lightning speed, to New Zealand, and opening it. I was just amazed at the quality and color of the wood they send.This after 17 years of being a client of this ama,ing company.Thank you guys.

5.0

Time saver!

By

Verified Buyer


Yes I know I could make my own fingerboard but these are always perfect and i'm just lazy.
Now if I could only convince StewMac to make preformed neck blacks without fingertboards i'd be much happier!
Are you listening StewMac? paddle-head, no truss-rod, designed for 22-24 frets, multiple wood flavors? You'd be the only company in the US that sold them!

4.0

Work required,  but a nice board

By

Verified Buyer


I purchased a Pau Ferro fingerboard from Stew Mac for a strat neck rebuild. The board itself was really nice, appeared to be edge grain and was slotted for a 25.5 scale. The finger board needed to be tapered to fit the neck and in doing so the thickness at the edge of the board increases as the taper increases towards the nut, meaning that if you want a uniform thickness and a thinner board the whole thing has to be sanded using a radius sanding block. The radius of the board sent was 12". I had wanted a 9.5 radius but that was not available slotted from Stew Mac. The good news is that I can use a 9.5 radius sanding block on the fingerboard in order to bring it down to an acceptable thickness. This will also require deepening the fret slots after sanding the board. So, in summary, there is quite a bit of work to do to fit the board on the American Standard neck. Buyers should be aware of this when purchasing. The quality of the board itself though is very good.

5.0

Just what I ordered.

By

Verified Buyer


Stewmac are on top of the game. Excellent service levels. Ample packaging was used to sip the fretboards to me and arrived in perfect condition. I will definitely be doing more business with this site, but have also learnt a lesson, pay the extra for courier. Our local post office could learn a lot about service from you. Thank you!

5.0

Very nice fretboard

By

Verified Buyer


These are great fretboards. Closest thing to Brazilian I have worked with. Looks and feels fantastic. Given the price of fretboards that are not nearly as nice, these are a solid value.

Showing 10 of 73 Read more reviews >>