Please see our COVID-19 Statement
Strat Pickguard with Humbucker

Strat Pickguard with Humbucker

Strat Pickguard with Humbucker Black / white / black

Black / white / black

Item # 0064
In stock, ready to ship!

$27.62

+
Strat Pickguard with Humbucker White / black / white

White / black / white

Item # 0062
In stock, ready to ship!

$27.62

+
 
Total:
Qty:
Scroll to Top

Strat Pickguard with Humbucker

About This Item

Great looking laminated pickguards designed for a standard-size humbucker at the bridge position, and standard-size single-coil pickups at the neck and middle positions.

Your pickups can be installed with or without covers.

These pickguards fit our bodies, and most production instruments. The top surface is glossy, and the underside has conductive foil shielding over the guitar's control cavity area.

0.100" (2.54mm) thickness, with 3/8"-diameter control pot mounting holes.

11 mounting screw holes, plus holes for installing pickups and switch. Don't forget Pickguard Screws, available separately.


CALIFORNIA PROPOSITION 65 WARNING
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.


Customer Reviews

  • Excellent
  • Good
  • Average
  • Fair
  • Poor
Write a review
4.0
  • 4.21 average rating from 14 reviews
Sort by
5.0

Great replacement for Squier Bullet Strat

By

Verified Buyer


Bought this to replace the pickguard on a Squier Bullet Strat. The fit is a little tight around the bridge, and the screw hole placement was a little off but I was expecting that (It's a Squier).

Here's a tip for what to do if the screw holes are off - use a Dremel tool to rout out the hole then fill with an epoxy wood filler. Allow the wood filler to cure for 10-15 minutes, put the pickguard in place, thread screws into the good holes to make sure everything's aligned and then gently thread the screw into the filled hole. Allow the wood filler to cure, remove the screw and now you have a perfectly drilled and threaded hole to use for mounting.

5.0

HOPPED UP STRAT

By

Verified Buyer


Installed a Humbucker in one of my Strat's Works and sounds GREAT..

5.0

Pick gaurd

By

Verified Buyer


Excellent fit. Great quality

5.0

Excellent

By

Verified Buyer


High quality, aluminum shielded pick guard. Well worth the money.

3.0

Not bad, but

By

Verified Buyer


Those 11 holes are well fitted to my strat, but the location of the humbucker pickup is wrong, about 1/16" closer to the bridge than the normal one.

4.0

Quite good!

By


Okay fit, well worth the price. Had to do some tinkering to make it fit the neck, but turned out great!

5.0

Beautiful Replacement

By


I bought the Pearloid version of this pickguard to replace a white one since they were a closeout item and I couldn't be more pleased! Very high quality!

2.0

Strat Pick Guards

By


bought two pearloids because of the closeout price. niether fit well. had to work on one quite a bit for it to fit.

4.0

Good quality product

By


I used it on my strat. Good quality product.

5.0

Nice quality product

By

Verified Buyer


Had to modify it to fit my '85 Fender Japanese Strat (odd-ball trem to blame). Very happy with the results.

Showing 10 of 14 Read more reviews >>
 
  • Stratocaster®, Strat®, and Squier® are registered trademarks of Fender Musical Instruments Corporation.