The adjustable bridge design found on current Gibson® solidbodies, with unnotched saddles with individual saddle screw retainer clips.
Thumbwheel height-adjustment studs and bushings are included.
Use a 1/4" drill bit to install the bushings.
|2-1/32"||12"||2-15/16"||M5 x .8|
About bridge & tailpiece measurements
String spread is the distance between the centers of the outer strings on a bridge or tailpiece.
Saddle radius determines the arc formed by all the individual saddle heights, and is similar to the measurement of a fretboard.
Stud/post spacing is the distance between the centers of the mounting posts of a bridge or 'stop' tailpiece.
Positioning the bridge
Find bridge placement for any scale with our free online tool fret position calculator.
Tip: Slotting Tune-o-matic style saddles
Nut slotting files work great for metal saddles. Choose your file size as you would when slotting a nut: use the same gauge as the string, or a few thousandths larger. After filing to the desired depth, we suggest polishing the slot with Mitchell's Abrasive Cord to remove file marks and burrs.
CALIFORNIA PROPOSITION 65 WARNING