2 grits in 1 file! A versatile no-chatter file for crowning frets.
Steel insert with 150 and 300-grit industrial diamond-coated concave cutting surfaces in ONE file for crowning frets. Its angled shape gives extra clearance over the guitar body at higher frets.
Our unique Dual-grit Diamond Fret File is two files in one, featuring an angled steel insert with 150 and 300-grit industrial diamond-coated concave cutting surfaces for crowning frets. Switching from one grit to the other is quick and easy; simply unsnap the file from the handle, turn the file around, and snap it in place again. The bent file shape is designed to give you extra clearance over the guitar body for shaping the higher frets. Diamond-coated cutting surfaces work on the forward and backward stroke without chattering, giving you better control for smoothly rounding the tops of the frets. The shape of the handle and 5-1/2" overall length make the tool comfortable to hold, efficient, and easy to control.
Diamond fret files are the best way to recrown your frets! Unlike traditional fret files, diamond files cut in both directions, they don't chatter or leave marks, and the fret is smoother after crowning. These files are being used by repair shops and major manufacturers all around the world.
Our diamond fret files have concave cutting edges, one for medium and small fret wires and one for wide fretwire. Each edge is electro-coated with micro industrial diamonds. These super-tough abrasive surfaces round the frets more smoothly than standard toothed files, for cleaner filing without chatter marks. Because the diamond particles cut on the forward and backward strokes, you get better control over your work and the job goes much faster.
Dual-grit Diamond Fret File is also excellent for working on the frets in the upper registers of acoustic and set-neck electric guitars. They virtually eliminate the chances of "gouging the top".
Works on stainless frets, too!
All of our tools are suitable for use on stainless-steel fretwire*. Modern stainless-steel fretwire is known to be harder than the traditional nickel-silver blends, but our own shop experience indicates the wire does not cause premature wear of files or sandpapers.
*Excludes our original Fret Tang Nippers. We recommend our Deluxe Fret Tang Nippers for stainless-steel fretwire.
CALIFORNIA PROPOSITION 65 WARNING