Please see our COVID-19 Statement
Jaws Fret Press

Jaws Fret Press

Jaws Fret Press

Jaws Fret Press

Item # 4431
In stock, ready to ship!

$337.82

+
Jaws Fret Press without Fret Press Inserts

Jaws Fret Press without Fret Press Inserts

Item # 4430
In stock, ready to ship!

$308.37

+
 
Total:
Qty:
Scroll to Top

Jaws Fret Press

About This Item

Fret an entire bolt-on neck, or most of an acoustic neck, FAST!
"My favorite fretting tool." — Dan Erlewine

The original handheld fret press
Jaws was invented by our own Dan Erlewine, master teacher of fretting techniques. It gives you the finest control as you press a fret into the slot—you actually feel it seating! You get the precision of an arbor press with the mobility of a hand tool.

NEW! Quick-change neck cauls
You get four padded neck support cauls, to cradle any neck:

  • Standard for guitar and bass
  • Wide for classical guitar
  • Narrow for ukulele, mandolin and banjo
  • Flat for bolt-on neck heels

A quick-release pin lets you swap neck cauls in an instant. The neck cauls slide on a brass bar, for centering the neck under the fret caul or moving off-center to press fret ends.

Self-leveling fret caul
The self-adjusting fret caul holds our 2-1/2" brass inserts, radius-curved and grooved to fit the fret. These are the same inserts used in our Fret Arbor Press and Jaws2.

Our Jaws Fret Press comes with these popular radii: 7-1/4", 9-1/2", 12" and 16", and a special 6" radius insert for gluing fret ends. Additional radii are available.

Lifetime guarantee
We manufacture Jaws here in Ohio, modifying the strongest clamping plier of all: the rugged FACOM/PROTO tool. Jaws is the finest tool available for installing frets, backed by StewMac's 100% Guarantee.

Why press frets?
Pressing the frets saves time and gives consistent results. That's why it's the method that's widely used in guitar production. Pressed-in frets are less likely to be loose or uneven, because there's none of the recoil produced by hammer blows.

Jaws2 Jaws2 for acoustic fretboard extensions
Hammering frets over an unsupported acoustic guitar top is risky! Jaws2 has special soundhole cauls and a self-leveling upper caul that take the stress off the guitar top, so you can safely press the frets into place. More...



CALIFORNIA PROPOSITION 65 WARNING
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.


Video

Instructions

Product Instructions

Jaws Fret Press Instructions

Overview and instructions for using the Jaws Fret Press.

Customer Reviews

  • Excellent
  • Good
  • Average
  • Fair
  • Poor
Write a review
5.0
  • 4.77 average rating from 31 reviews
Sort by
5.0

Jaws fret press

By

Verified Buyer


I think it's a great tool just learning how to use it properly at this point. It should work on all or most of the fretboard until you get to the final frets depending on the type of neck. I will update you later on this.

5.0

Dream tools!!

By

Verified Buyer


Fret exchange was my first experience.
With this tool, the fret can be driven in evenly, so I can work while watching the fret entering the neck, so this time it was a scalloped neck, but I think it was finished well.
We are glad to get this tool, thanks to "Stew Mac" for providing it.

4.0

Great tool, but have to shim cauls

By

Verified Buyer


Nice tool, but I've had issues with slop between the caul and the inserts. Under pressure, the insert presses at an angle and causing the frets to not seat properly.

To ensure the clamping force goes directly into the fret, I've installed a metal shim between the caul and insert.

5.0

Great Tool

By

Verified Buyer


Shure glad i bought it for my Shop!

5.0

Regret not buying this sooner

By

Verified Buyer


So yeah I admit it, I looked at this tool regularly for the last 10 years thinking I was doing OK without it. I was wrong. I bought one to do a fragile acoustic I did not want to do on the drill press and I fell in love with it. There is a learning curve as with most tools. You have to develop a feel for pre-adjusting it before doing a glued-in fret but it does not take very long to get started. The frets are properly seated and ready to go. I like the fact the tool can hold the fret in while the CA sets. This tool is pricey but worth the money if you do a lot of fret work.

5.0

Very efficient

By

Verified Buyer


I used to use an arbor press but these work faster and have more feel. I don't feel nervous about applying to much pressure anymore.

5.0

JAWS rocks!

By

Verified Buyer


I just installed my first frets using JAWS on a flat classical cocobolo fretboard and couldn't be happier. Frets look perfect, fully seated, no hammer marks on frets or board, and took all of about ten minutes from unpacking the tool to start of end nipping and end dressing. I mounted the tool in a vise which left both hands free to hold the board and operate the clamp. I found that I couldn't just press the whole fret at once and be sure it was going in straight, so I began each fret by seating one end then pressing in the whole thing, then spot pressing across the width of the board and finally a last clamp across the whole feet. Takes much less time to do than to describe. The tool is great and the Stewmac service was too.

5.0

Excellent for most of the neck!

By

Verified Buyer


I found ever since using this device for fretting the job goes smoother and quicker. Its true you can use a dead blow hammer but you'd have to be mr perfect or else you could miss and damage the fretboard. You could also damage a fretboard with Jaws if you weren't careful but you just have to line up the fret onto the caul parallel and check the adjustment on the back of the tool to make sure you have adequate pressure! Once in use the overall affect of how nicely a pre radiused frets seat down evenly without much fuss is worth it. Its just the upper frets that you have to resort to other fretting methods. Great hardware though!

5.0

Problem Solver

By

Verified Buyer


Great tool for clamping and installing frets - particularly in worn fingerboards. Stable, simple and easy to use.

4.0

Superb addition for my shop

By

Verified Buyer


Just finished a partial refret on an '86 Martin 12-string using mine for the first time. Very easy and instinctive to use and simply stellar results - so good that I will very, very likely employ press/arbor vs traditional hammering any and every time it is feasible. I deducted one star solely for its price which I find a tad bit restrictive for the hobbyist/enthusiast. This is a great tool.

Showing 10 of 31 Read more reviews >>