Please see our COVID-19 Statement
White/b/w Laminated Pickguard Materials

White/b/w Laminated Pickguard Materials

White/b/w Laminated Pickguard Materials

Item # 1039
In stock, ready to ship!

$20.45

+
 
Total:
Qty:
Scroll to Top

White/b/w Laminated Pickguard Materials

About This Item

Traditional white/black/white 3-ply laminated pickguard material for making replacement and custom pickguards and coverplates.

Rectangular PVC gloss-surface plastic sheets.

0.106" thick, 11-1/4" x 19-1/8" (2.7mm x 285mm x 485mm)


CALIFORNIA PROPOSITION 65 WARNING
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.


Instructions

Product Instructions

Cutting Custom Pickguards with the Pickguard Bevel Cutter

How to cut and bevel custom pickguards with the Pickguard Bevel Cutter.

Customer Reviews

  • Excellent
  • Good
  • Average
  • Fair
  • Poor
Write a review
5.0
  • 5.00 average rating from 14 reviews
Sort by
5.0

Great product

By

Verified Buyer


Outstanding material. I had enough to make 2 pickguards from it.

5.0

Better than expected

By

Verified Buyer


My title is not intended to infer I expected any thing less than high quality from Stew-Mac, but I can say that I am pleased and a little surprised at the sturdiness and finish on this pick guard material. I am going to use it to replace the warped original guard on my'63 Fender Music Master. I almost hate to cut it, it looks so good!

5.0

pick guard material WBW

By

Verified Buyer


Great bought it to make a strat style guard, bonus, I had enough to make two of them !
High quality. Recommended

5.0

Looks great

By

Verified Buyer


This material looks really great and is easy to work with. I cut it using my CNC machine for the correct geometry. My only complaint (besides wishing it was a couple of dollars cheaper) is that the protective film tends to come loose on the edge while routing a little easier than I'd like, causing me to fear that it's scratching it before installation on the instrument. Outside of that, it's great!

5.0

Faster than Expected.

By

Verified Buyer


Good quality material, arrived very quickly, as in from the same city not the other side of the world (DHL), in perfect condition. Very happy to recommend doing business with these good people.

5.0

Excellent for replacement pickguard

By

Verified Buyer


I bought this material to make a replacement pickguard for my 70's era Strat. The old one had been hacked up to install a humbucker in the bridge section. The material was easy to work and showed no inclination to crack or chip while being sawn, filed, routed, or sanded. It has a protective film over the glossy side which works well. All in all a very nice product and price with enough for to should you screw one up.

5.0

Pickguards

By

Verified Buyer


Great material for multiple pickguards. It routed well and finished off with a good fine edge.

5.0

Good stuff

By

Verified Buyer


Making your own pickguard is not the easiest thing in the world. Get a feel for the material by working on some scrap, and don't be discouraged if you blow your first try. If you want one pickguard, get enough material for two. Here's a hint: don't be afraid to break out the hand file. Keep the router away from sharp corners and other weak spots where it might grab and destroy your piece - do those by hand. This is nice thick material, equivalent to factory. Custom Stratocaster & Jazzmaster

5.0

WBW pickguard material

By

Verified Buyer


This pickguard makes large pickguards or several small guards. With a beveling router bit you can make a beautiful guard that will dress up that next project.

5.0

White pickguard material

By

Verified Buyer


I needed a new pickguard for my Firebird VII. A used pickguard was too costly so I bought some of this material which was of the same thickness. Works great and looks even better!

Showing 10 of 14 Read more reviews >>