Please see our COVID-19 Statement
StewMac Screamer Pedal Kit

StewMac Screamer Pedal Kit

StewMac Screamer Pedal Kit With Bare Enclosure
New!

With Bare Enclosure

Item # 2350
In stock, ready to ship!
15% OFF SALE

$67.08
$57.02

+
StewMac Screamer Pedal Kit With White Enclosure
New!

With White Enclosure

Item # 2350-W
In stock, ready to ship!
15% OFF SALE

$68.33
$58.08

+
 
Total:
Qty:
Scroll to Top

StewMac Screamer Pedal Kit

About This Item

Build the pedal that redefined overdrive
From SRV to Trey Anastasio to John Petrucci, this game-changing Tube Screamer-style overdrive will turn your timid tube amp into the tone monster you know it can be.

What else can be said about the TS-808 Ibanez Tube Screamer? With simple controls and the mythical JRC-4558D chip, this pedal pushes your amp into great sounding overdrive, WITHOUT completely changing your tone. It's like the amp you love, but better, and at a volume that won't get you evicted.

Don't buy your next pedal—build it!
We love the original TS-808 circuit, so why mess with perfection? We include the same JRC-4558D chip that gives this pedal the perfect mix of grit and transparency. We improved the little things to make this pedal even better: we added true bypass, reduced the noise, and made sure all of the components were top quality from switch to jack.

With controls for volume, drive, and tone we've kept the simplicity that's made this pedal a classic. Just twist the knobs and this pedal will bring out the raunchy tones hidden in your amp. Because the circuit is so transparent, it will sound different depending on which amp you plug it into.

It's more than just a schematic
We include everything you need to build your new pedal:

  • Top quality components from resistors to switch
  • Road-worthy rugged metal enclosure with all holes pre-drilled
  • Bare or powder coated white finish
  • 3PDT breakout board for low noise
  • Input, output, and power jacks rear mounted for easy cable routing
  • True bypass switch
  • Custom printed labels

Easy! Download your instructions
We've made these instructions ready to download now. You can zoom in on every solder joint and resistor value to make sure your build is perfect from start to finish. With these step-by-step instructions, full color illustrations, and complete wiring guide you'll build a pedal you'll enjoy for a lifetime. Be proud every time you step on the custom pedal that you built.

Make your pedal your way
It's never been easier to have an inspiring sounding and looking pedal. We include labels for all of the knobs for a professional look. Paint your own raw metal enclosure or choose a powder coated enclosure that is ready to put on your board now.

Take the first step to customize your sound.



CALIFORNIA PROPOSITION 65 WARNING
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.


Video

Instructions

Product Instructions

StewMac Pedal Kit Instructions

Download the assembly guide and wiring diagrams.

Customer Reviews

  • Excellent
  • Good
  • Average
  • Fair
  • Poor
Write a review
5.0
  • 4.82 average rating from 17 reviews
Sort by
5.0

Incredible pedal, even better service!

By

Verified Buyer


Stewmac rocks! Having finished their 5E3 tweed deluxe kit, I figured the tube screamer would be an easy weekend job to tackle. So, I was confused and a bit bummed when the pedal didn't work the first go 'round. I shot an email into the customer service to see if they could shed any light on the situation, and was blown away with how helpful and interested they were. Providing documents and different test points to help me troubleshoot from home using a basic multimeter. Tommy was awesome, thanks again man! This pedal screams and I am so satisfied!

5.0

Novice Experience with Screamer Pedal Kit Assembly

By

Verified Buyer


The directions were some of the best I have seen for various kits. Even with no soldering experience, the directions get you going and keep you out of trouble with tips. The holes in the end of the frame were too small to fit the phono plug receivers. I just drilled both of them out slightly and the problem was fixed. Everything else went ok. There are 3 tiny, brass screws for the knobs that can easily be lost and should be in a plastic bag by themselves.

5.0

Way fun project for those learning to solder

By

Verified Buyer


I was a little intimidated by soldering an entire circuit board so I wasn't sure what to expect with this. I was not very good at soldering to be honest. However this was a lot more fun than I imagined it would be and I definitely am more confident in my soldering skills after completing the project. Only took me a few hours to solder everything up and the instructions were amazing. It actually worked when I was done and sounds great. Id recommend this even if you are a messy solder'er

Also one of the knobs was missing an internal screw to tighten it, but I emailed support and they sent me a new one right away. So 10/10 on the support

5.0

Great Project

By

Verified Buyer


Great product and easy to follow directions. The hardest part of the build was identifying and sorting the resistors. A great hack is to take a photo on your phone so you can zoom in to see the markings. Take your time and double check your polarity before soldering. The build took about 4 hours and sounds awesome. Highly recommended.

5.0

Crunchy TACO Tube Screamer.  Works Great!!  Like it way more than my TS9

By


Love this Tube Screamer. Sounds Awesome! Easy Build . Well it was for me anyway I didn't build it..lol.. I painted it and MOE TACO built it.. He said it was easy.. With easy to understand good directions.. Think I am gonna get the FUZZY TACO next. Stew-mac service was great and came right on time.

4.0

You'll want to know how to solder...

By

Verified Buyer


I don't think any major pedal company needs to worry about any competition coming from me. I have very little exp. with soldering. Having more of that would have greatly helped me put this thing together correctly. I spent some time putting all the pieces in the right place but in the end it didn't work at all. That being said I had a lot of fun putting it together, the directions couldn't be easier to follow, and I learned a valuable lesson to let the pros do the building. Again, a lot of fun to do. Just didn't work out in my case. Totally user error.

5.0

Great product and fun to put together!

By

Verified Buyer


I'm a novice at soldering, but still, it was not difficult as directions were very good. I highly recommend using a PC board holder. It worked the first time and sounds great. I had fun with my design.

5.0

Another fun and easy build

By

Verified Buyer


Stewmac scores again! The Screamer pedal does exactly what it is supposed to do - drive those tubes to break up and Scream.

As always, Stewmac’s illustrated instructions are the best in the build-your-own pedal industry. The circuit boards are always solid and the quality is top of the line.

My only hope is they expand the selection they offer. I highly recommend their pedal kits.

5.0

Great gift for my 13 year old

By

Verified Buyer


I bought this pedal for my 13 year old boys b-day... he built it and loved it. The pedal was customized by my son and it sounded great!!

4.0

Great pedal kit

By

Verified Buyer


Looking for a fun project and discovered this kit. Very fast shipping and a decent price.

Showing 10 of 17 Read more reviews >>