Please see our COVID-19 Statement
StewMac PC Board Holder

StewMac PC Board Holder

StewMac PC Board Holder

Item # 0500
In stock, ready to ship!

$20.95

+
 
Total:
Qty:
Scroll to Top

StewMac PC Board Holder

About This Item

Make your delicate PCB work easy!
Working on small PCBs (Printed Circuit Boards) is intricate work. One small slip can ruin a trace or melt a fragile component. You need both hands for these jobs, and holding your work steady is important for a clean connection (and so you don't burn yourself!).

Our PC Board Holder is adjustable to hold most PCBs and even small amp turret boards. The spring-loaded adjustable arms hold boards securely with notches for the most common sizes. Each notch is tapered to lock the board in place. The entire holder opens to a maximum of 7.87" (199.89mm) for larger boards.

Locks AND rotates for the perfect angle
The holder locks in four places to your board so it won't slip, slide, or move when you are working. You can rotate the board 360-degrees to find the perfect angle to work—even on a crowded board.

Perfect for our Pedal Kits
If you've ever worked on pedals, amps, piezo systems, or active preamps you'll save yourself the heartbreak and headache of accidentally destroying your work.

    Custom arms holds PCBs in four common thicknesses:
  • 5/64" (1.98mm)
  • 3/32" (2.38mm)
  • 1/8" (3.17mm)
  • 5/32" (3.9mm)

Max opening 7.87" (199.89mm). Some assembly required.

Never melt your work again!

Working on amps? Our Mojotone Amplifier Chassis Stand is perfect for holding larger chassis.



CALIFORNIA PROPOSITION 65 WARNING
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.


Customer Reviews

  • Excellent
  • Good
  • Average
  • Fair
  • Poor
Write a review
5.0
  • 4.88 average rating from 16 reviews
Sort by
4.0

Why didn't I have this before?

By

Verified Buyer


Very handy device for PCBs, I'm shocked I had never gotten one before. Easy hold to mount components, then a quick flip to solder, just what you need.
4 instead of 5 starts because the width adjustment is a bit loose/sloppy, a thumbscrew and slide with lots of tolerance, I'd pay more for a machined fit between components.

5.0

Great for DIY pedal builds!

By

Verified Buyer


Wish I had this tool when I built my first DIY fuzz pedal last year. Working on a new DIY pedal and I've already saved at least 50% of the time it takes to stuff and solder a vero board. Cleaner work with much less cussing... lol.

5.0

Simple effective and at that price better than a homemade version

By

Verified Buyer


I am workung on modifiying guitatr effects and trying to do these things with the circuit board bouncing around as one solders is ridiculous.
I am usually apt to rig up something quick to solve the immediate ptoblem that usuallly leaves rthings messu and difficult. This thing holds the board ,rotates ,has spring action to easy adjust, and at very cheap cost
Thanks a Bunch.

5.0

This is so much better than the alligator helping hands

By

Verified Buyer


Excellent. Holds my various small boards for soldering guitar pedal kits.... finally, a better Mouse Trap

5.0

Great little board holder

By

Verified Buyer


Man, I was greatly surprised...I expected something much less robust that this little holder...simple to assemble and has more mass than I thought. Is it as nice as a deluxe Pan-a-vise? No, but it gets the job done and is much less expensive to boot (the Pan-a-vise does have all sorts of accessory jaw systems for holding all kids of stuff other than just PC boards). This is a purpose driven alternative that focuses on a pretty wide range of PC boards and smaller turret and fiberboards. You get this functionality for a great price if you don't mind a little bit of assembly (8 screws).

5.0

PC Board Holder - Works Well For Many Applications

By

Verified Buyer


I bought this PC Board Holder for designing, populating and soldering new circuit boards, and repairing circuit boards that have blown components. However, I have also found that this shop tool works well to hold other jobs! I have set it up to hold mechanical clock movements, electric motors, and other odd shaped jobs that normally would require a third hand to position the repair process off the work-bench. The Holder is made well, is strong, and holds its balance when a heavy object is attached. Additionally, to provide more versatility, I have made specialized jigs that fit into the ends of the Holder to hold unusually shaped parts (e.g., for microphone cartridge and diaphragm repairs). Because the ends can be removed and exchanged, the Holder is much more versatile for many applications besides just guitar repairs! So you might like it for your shop!

5.0

Awesome tool

By

Verified Buyer


This is one of the best toolsI have bought it holds the circuitboard securely while I'm working on it also I had a circuitboard that was longer than it would hold so I made a piece of wood is that same size as the bottom rail made it longer so that I could put it on a bigger circuitboard and it works great and the price was very reasonable

4.0

Works great for 99% of the board

By

Verified Buyer


This product was a lifesaver and works great for most of the board! The only problem I had was the holders on the side overlap the board slightly so if you have to make a connection on the far right or left of the board it can be a tight squeeze for your iron.

5.0

Better than an extra set of hands!

By

Verified Buyer


Perfect tool for holding PC boards. Made my DIY pedal build soooooo much easier. It's sturdy and the three different notches allow you to fit different sized boards easily. Man, I am so happy I bought this stand. Really makes soldering much, much safer, as you don't want to much around too much with a tiny board and tiny components while holding a hot soldering iron in your other hand.

5.0

Works just fine.

By

Verified Buyer


Makes working on PC boards much easier.

Showing 10 of 16 Read more reviews >>