Golden Age Pre-wired Harness for Jazz Bass

Golden Age Pre-wired Harness for Jazz Bass

Golden Age Pre-wired Harness for Jazz Bass

Item # 1937
In stock, ready to ship!

$56.84

+
 
Total:
Qty:
Scroll to Top

Golden Age Pre-wired Harness for Jazz Bass

About This Item

Assembled and soldered in the USA using top quality components. Ready to drop into your bass!

    Worth every penny!
  • Premium hand-wired for drop-in retrofit
  • Upgrade your old wiring
  • Save work and save time on new builds

Soldered in our Athens, Ohio shop
We professionally hand-soldered these harnesses using the best brand-name components for long life and great sound: CTS pots, Orange Drop® caps, Switchcraft™ output jack and cloth push-back wire.

Tested and 100% Guaranteed
Each Golden Age harness comes to you mounted on a reusable plywood template, which is a tool in itself: save it for future wiring jobs. The template holds the components correctly so the finished harness fits neatly into the guitar's wiring cavity. You simply solder your pickup lead wires to the harness.

Got questions? Call or email us. A friendly gearhead will be happy to help!

CTS Control Pot Specs
Resistance 250K-ohm
Shaft diameter 0.235" (5.95mm
split shaft, fine knurling
Thread 3/8" x 32
Threaded portion height 3/8" (9.52mm)
Required mounting hole diameter    3/8" (9.52mm)


CALIFORNIA PROPOSITION 65 WARNING
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.


Customer Reviews

  • Excellent
  • Good
  • Average
  • Fair
  • Poor
Write a review
4.5
  • 4.63 average rating from 8 reviews
Sort by
5.0

No Brainer Using This Harness

By

Verified Buyer


This is the second time I've used one of these Golden Age Pre-Wired harness. The first was for a custom P-Bass. This time I was redoing all the electronics in my 1972 Fender jazz. Using this harness was a huge time saver, plus that is nicely done and spaced correctly made it a no brainer to use. Removed the old pots and harness from the control plate. Then attached the Golden Age harness and soldered the pickup wires to it. That easy!

5.0

Some advice for Squier J Bass made  2005

By

Verified Buyer


Installation required slightly enlarging holes for the poles. The pots fit in the cavity without modification. I had to use my own vinyl insulated ground wire as the cloth insulated one provided with the set would not slide through the hole in the body. The insulation peeled back as I tried to pull it through. StewMac take note

4.0

Almost perfect

By

Verified Buyer


I was upgrading the pick-ups and electronics in a Squire Jaguar Bass. Thought this would be perfect and it was - mostly. The pots come prewired and mounted on wood in the exact way it would fit in a Jazz bass. But the Jaguar has a slightly different hole pattern. The prewired harness has a semi-rigid ground wire soldered across all the pots. I was able to make it fit by bending the last section of the rigid wire. Not really a big deal, but there are many basses that aren't Jazz basses that this harness would fit easily if they would just use a more flexible wire for this ground.

5.0

Volume tone controls for fender jazz bass

By

Verified Buyer


These were so easy to install and the control over volume and tone makes it easy to find your sound

5.0

Easy as Pie !

By

Verified Buyer


Could not have been an easier install ....what more could you ask for .

4.0

Golden Age Pre-wired Harness for Jazz Bass

By

Verified Buyer


Nice and clean wiring and solder. Easy to install and has a nice clean sound.

4.0

A little more wire please

By

Verified Buyer


I just installed this on a Carvin bass guitar. Normally I get a wiring kit and do all the soldering myself, but thought this would save labor cost and time, and make more sense for my paying customer. It didn't exactly work out that way. The wires that run from the pots to the guitar jack were an inch to short so I ended up needing to do additional soldering anyway. An extra inch or two would have made a big difference and seems like a no-brainer for this harness. Especially when you need to splice in cloth-covered wire which is a pain to deal with already! Was glad I had some extra in my shop.

5.0

Time Saver

By

Verified Buyer


This sure made my Jazz bass assembly easy. Top notch components.

 


StewMac PDF Catalog, page 76 See Golden Age Pre-wired Harness for Jazz Bass
on page 76 of our StewMac Digital Catalog



  • Jazz Bass® is a registered trademark of Fender Musical Instruments Corporation.