A modern take on the classic Gibson voice
A high-output version of the 490T, Gibson's 498T humbucker combines the more powerful response of an Alnico V magnet with additional matched windings on each coil, which puts the emphasis on the pickup's upper midrange frequencies for enhanced crunch and sustain. The 498T is perfect for any hard rock application, easily overdriving amplifiers for a beefy, sizzling output that boosts any guitar's power and presence.
The pole pieces on the 498T are also aligned a little further apart to accommodate the spacing of the strings at the bridge, which is different than the spacing of the strings at the neck. This aids in producing powerful leads and thick rhythm without sacrificing single-note definition. The 498T features shielded, four-conductor wiring for series, parallel or split coil operation, and is fully wax potted to eliminate any chance of microphonic feedback.
Gibson 498T "Hot Alnico" Neck Humbucker specs:
- Alnico V magnet
- 4-conductor wiring for coil-tapping, series/parallel, and phase switching
- Height adjustment screws, springs, and wiring diagram included
- Details: High output, enhanced mids and highs
Bridge postion: 9K ohms output, 2.03" polepiece spread
- Length: 2.75" (69.85mm)
- Width: 1.5" (38.10mm)
- Height: 1.06" (26.92mm) including mounting tabs
CALIFORNIA PROPOSITION 65 WARNING