CTS Push-pull Pots, DPDT

CTS Push-pull Pots, DPDT

Buy more, save more!
CTS Push-pull Pots, DPDT Split shaft, 250K-ohm (CTS #450S 3908)

Split shaft, 250K-ohm (CTS #450S 3908)

Item # 0227
In stock, ready to ship!

$8.95

6 or more $8.14
12 or more $7.43
+
CTS Push-pull Pots, DPDT Split shaft, 500K-ohm (CTS #450S 3910)

Split shaft, 500K-ohm (CTS #450S 3910)

Item # 0228
In stock, ready to ship!

$8.95

6 or more $8.14
12 or more $7.43
+
CTS Push-pull Pots, DPDT Long split shaft, 500K-ohm (CTS #450S 3912)

Long split shaft, 500K-ohm (CTS #450S 3912)

Item # 0229
In stock, ready to ship!

$9.95

6 or more $9.05
12 or more $8.26
+
CTS Push-pull Pots, DPDT Solid shaft, 250K-ohm (CTS #450S 3909)

Solid shaft, 250K-ohm (CTS #450S 3909)

Item # 0227-S
In stock, ready to ship!

$8.95

6 or more $8.14
12 or more $7.43
+
CTS Push-pull Pots, DPDT Solid shaft, 500K-ohm (CTS #450S 3911)

Solid shaft, 500K-ohm (CTS #450S 3911)

Item # 0228-S
In stock, ready to ship!

$8.95

6 or more $8.14
12 or more $7.43
+
 
Total:
Qty:
Scroll to Top

CTS Push-pull Pots, DPDT

About This Item

Add a switch without adding a hole. Sized to fit more guitars.
On these top quality CTS control pots, the switch contacts are on the side, not the back. This makes them shorter, so they'll fit most guitars without routing—only 1" cavity depth is needed.

The double-pole double-throw switch adds lots of wiring options. Pull the knob to coil-cut a humbucker, switch a pickup in/out, or control anything: the switch is electrically separate from the control pot.

CTS pots have long been the first choice in American guitars. CTS worked with StewMac to create these unique control pots. In addition to their space-saving size, they feature a longer-life brass shaft and tighter ±10% resistance tolerance compared to CTS products offered elsewhere.

Their precision audio taper gives smoother, more accurate response than you'll get with economy pots. The volume swells evenly from 0 to 10, with no abrupt changes.

Available with split shaft for fine-knurled (24-spline) knob, or with smooth shaft to fit a set-screw knob. The long shaft #0229 fits Les Paul® and other carved-top solidbodies.

Each CTS pot includes a flat washer, lock washer, and two hex mounting nuts for custom height adjustment on a pickguard or control plate.


Split shaft, fine knurling
Diameter
Height

0.235" (5.95mm)
3/8" (9.52mm)
Solid shaft
Diameter
Height

1/4" (6.35mm)
3/8" (9.52mm)
Thread 3/8" x 32
Thread height 3/8" (9.52mm)
Thread height, long shaft 3/4" (19.05mm)
Required mounting hole diameter    3/8" (9.52mm)
Required cavity depth 1" (25.4mm)

Which pot value should you choose?
500K pots are standard controls for humbuckers, and 250Ks are usually used for single-coil pickups. A 250K gives a slightly warmer tone than a 500K, and bleeds off (attenuates) some of the high frequencies to ground.

Replacement Mounting Nuts and Lock Washers are also available.


CALIFORNIA PROPOSITION 65 WARNING
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.


Trade Secrets!

Trade Secrets!

Upgrading control pots: choosing the right pots and knobs

Lots of low-cost guitars play great, even though the manufacturers cut costs on hardware and electronics. Swapping out your control pots is an easy mod with big results. Erick Coleman shows you how to avoid trouble…

Instructions

Product Instructions

Wiring the CTS DPDT Push-Pull Pot

How to wire the CTS DPDT Push Pull Pots.

Customer Reviews

  • Excellent
  • Good
  • Average
  • Fair
  • Poor
Write a review
4.5
  • 4.35 average rating from 68 reviews
Sort by
5.0

Worked great

By

Verified Buyer


Smooth roll and love having an extra switch

1.0

Wrong part for an es-335 guitar.

By

Verified Buyer


I did not find anything that said these pots won't fit an es-335 so I ordered them. When I tried to fit one through the f hole, the body was too wide. I requested return info and a replacement part that fits. Instead, my case was recommended to a Stew Mac tech who said to remove a pick up and install the pot through there. I thanked them for the help before removing the pick up and finding even a smaller hole through the center block only big enough for the pick up wire. I bought the right parts on e-bay.

Response from StewMac


Hi Wayne,

Thank you for sharing your honest feedback with us. We're sorry to hear that these CTS Push-pull Pots, DPDT were too large to install in your ES-335, no matter which route you tried to take. We stand behind our return policy -- if you're not satisfied with a product, you may return it anytime for a refund or exchange. Please call us at 1-800-848-2273. Our support team has decades of experience making customers happy, and we look forward to helping you with this.

5.0

Great design

By

Verified Buyer


I love the design of these push-pull pots. The design of holes instead of tabs allows the control cavity to be cleaner. So if you're cramped for space, this design allows you to fit more components in a smaller area.

5.0

Fender p bass rewire

By

Verified Buyer


Used for first time in fender p bass wiring. Pulls for series/ parallel & q filter/ tone cap.
High quality pots , a little beefier than old style pull pots, a little tough to redo things if you need to because board is a little crowded compared to old style pull pots. But good product and reccomended as long as you have wide enough cavity & dont want to redo or change things.

5.0

I like em!

By

Verified Buyer


I've used the typical, old style CTS Push/Pull pots for decades and have learned how to deal them and to solder them so they don't get cooked. I attached lots of little alligator clips to the lugs to act like heat sinks. With these new ones, its very easy to solder to the little eyelets, especially with pre-tinned wire and my alligator clips stay in the drawer.

5.0

Push/Pull POT

By

Verified Buyer


I have these in 4 of my guitars, by far THE highest quality P/P POT I have found!
Not only the potentiometer itself but the switch itself. Don't waste your $ on anything less.

3.0

Great pots, not as easy a using lugs for connections

By

Verified Buyer


These are really quality pots and feel like they can take a beating. I'm glad StewMac put together the data sheet on these since that was impossible to find through regular searches on the web. Not as easy to solder if you don't have some practice. I'm ok, but not great and found these a bit tight and difficult to work with, soldering on the PCB.

3.0

Minimum required cavity depth understated

By

Verified Buyer


I tried to install this pot in an SG, whose cavities are naturally shallow due to the thinness of the guitar. According to the advertised dimensions, this pot should have worked, but it did not. To make it fit, I had to remove the inner locknut, but doing so resulted in the post protruding too far outside the body, thus preventing the control knob from riding close enough to the body. If one could abide the ugliness of the end result, then I suppose the pot would work. I, for one, could not. I consider this a flaw in advertising, not a flaw in the product. I have no reason to doubt the quality of the pot. It simply does not fit as described.

Response from StewMac


Hi Peter,

We're very sorry to hear that these CTS Push-pull Pots weren't the right fit for your SG. Remember, your satisfaction is guaranteed. If you would like to speak with our Customer Support Team about a refund for this product, please feel free to give us a call at 1-800-848-2273. We look forward to helping you with this.

4.0

Great Pots, but.....

By

Verified Buyer


They work great but I found myself having to get very creative on routing the wires. I used 4 of them in a Les Paul Studio that I gutted and rewired for a customer. He wanted the Jimmy Page setup and with all the wiring involved the push pull solder points seem too tight up to the main lugs on the pot. If I were to do that job again I would probably use a pot with the 6 exposed lugs on the body of the switch. I am sure it would be much easier to solder it up.

3.0

Dpdt quality switch.

By

Verified Buyer


Wiring instructions are NOT good.

Showing 10 of 68 Read more reviews >>
 


StewMac PDF Catalog, page 76 See CTS Push-pull Pots, DPDT
on page 76 of our StewMac Digital Catalog