Battery-free onboard overdrive! Dial in some gritty fun: Black Ice features four different overdrive wiring options. Put your 250K guitar or bass tone control to better use!
- Compact encapsulated 1/2" cube needs no batteries.
- Works with practically any passive guitar or bass pickups.
Now with 4 different overdrive options.
Black Ice circuitry is encapsulated in a compact 1/2" cube that requires no batteries to power its nastiness. Installation can be as simple as replacing your 250K tone control's capacitor. You can wire it for just a little grit, a more aggressive grind, or to border on a raw '60s fuzz.
Black Ice works with practically any passive guitar or bass single-coil, humbucker, P-90 or lipstick pickups. Wiring instructions included.
Black Ice features 4 different wiring configurations:
Polite: A little grit for single-coils; mild distortion for humbuckers and P-90s.
Warm: Mild distortion for single-coils; a little more for humbuckers and P-90s.
Hot: Medium distortion for single-coils; aggressively raw for humbuckers and P-90s; subtle growl for basses.
Industrial Strength: Nasty with hotter pickups; slightly more growl for basses. The best wiring option for weak pickups.
Note: Use a 250K pot as your Black Ice control. The instructions also include diagrams for wiring your Black Ice in a stomp box, and for using a push-pull pot to switch between the Black Ice and your tone control.
Black Ice isn't designed to replace your favorite distortion pedal. It won't make your amp a fire-breather, and it won't boost your volume or sustain. In fact, you may notice a subtle volume drop with the Hot and Industrial Strength wirings and high output pickups. Black Ice is not designed for use with active pickups.
CALIFORNIA PROPOSITION 65 WARNING