3M Pickguard Adhesive Sheet

3M Pickguard Adhesive Sheet

Buy more, save more!

3M Pickguard Adhesive Sheet

Item # 4597
In stock, ready to ship!

$3.54

6 or more $3.08
12 or more $2.65
+
 
Total:
Qty:
Scroll to Top

3M Pickguard Adhesive Sheet

About This Item

No brushing, no mess, no cleanup. Here's the easy way to attach an acoustic guitar pickguard.

Strong 3M® pure adhesive in a conveniently-sized sheet with protective covering on each side. The sheet is 0.002" x 6" x 8" (0.05mm x 152mm x 203mm), for use on finished surfaces only.

Attach a pickguard with no mess and no cleanup:
1. Peel away the covering from one side of the sheet
2. Adhere the sheet to the back of the pickguard
3. Carefully trim away the excess
4. Peel away the remaining covering
5. Attach the pickguard to the guitar



CALIFORNIA PROPOSITION 65 WARNING
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.


Trade Secrets!

Trade Secrets!

A shrinking pickguard cracks the guitar top!

In Dan Erlewine's shop: This Martin D-35 has a cracked top due to the pull of a shrinking plastic pickguard. Dan fixes the problem and shows how to keep this happening from happening again.

Customer Reviews

  • Excellent
  • Good
  • Average
  • Fair
  • Poor
Write a review
4.5
  • 4.42 average rating from 66 reviews
Sort by
5.0

Great Transaction

By

Verified Buyer


Product exactly what I wanted and what was described. Fast delivery. Very Satisfied.

5.0

Quick Fix

By

Verified Buyer


Quick & easy with no mess, if it stays put I give it 5 stars.

5.0

Pick guard adhesive was excellent

By

Verified Buyer


I have a j160e gibson and the pick guard had come loose,I tried the local guitar shops in the area for what i could use to re attach the guard but no one had any advice on how to do it until I got in contact with Stew Mac and bingo my problem was solved with great results using 3m pick guard adhesive.
Thank you
Mario Tulipano
Mississauga ontario

1.0

Not all that great

By

Verified Buyer


Not good for thicker vintage style pick guards "ala Gibson" the applies perfectly however a corner is lifting up on my latest build. Same thing happened on an earlier build as well.. not impressed

4.0

Works good, but watch out!

By

Verified Buyer


Used the sheet for a pickguard project, but had my share of problems. First was my fault as I didn't have my pickguard placed exactly where I wanted it the first time I set it down on the guitar, had to pull it up to re-align, before I had even pushed down at all, and what happened was that small areas of the adhesive stuck harder than others and once I got it up, it had balled up in several areas, apparently from snapping up from guitar top. Didn't notice this at all, so when I got it into position the second time, looked good, so I rubbed it down, and what I found was that there were 5 or 6 dime sized bulges in the pickguard. Ouch.
Well, I couldn't live with that, so I ordered another sheet. Pulled up the pickguard and phoned StewMac to find the best solvent for removing the adhesive, was told to use Naptha. This adhesive laughs at Naptha. Don't bother. Tried Acetone, which worked much better, but was still a major effort to get that glue off, I spent around an hour and a half, and couldn't help thinking there must be a better solvent for this stuff. StewMac? Mebbe call 3M and find out?

5.0

Another quality product!

By

Verified Buyer


Just what I needed for installing new pick guards!

5.0

Great for re-installing the old pickguard

By

Verified Buyer


I took the black pickguard off my old Martin and was going to put a new one on but nothing would fit the old footprint on the guitar. The alternative was to use the old pickguard but the edges had curled somewhat and were mostly rigid compared to flexibility of the rest of the pickguard. But the footprint was perfect so the only hurdle was getting the edges to adhere. This 3M product did the job! The tip of the pickguard along with the slightly curled edges STUCK GOOD!

5.0

Better than any other method I've tried.

By

Verified Buyer


Works very well for adhering a new pickguard. in fact, it is the only method I use any more. Previous method was using spray adhesive but this is easier. I trust 3M to make a proper adhesive, but time will be the test. So far, so good.

5.0

GREAT product

By

Verified Buyer


I used the sheets to place a celluloid guard on my instrument and it worked great!!!!! Will be ordering some more sheets soon!

5.0

This struff is amazing

By

Verified Buyer


I had to fabricate a new pickguard for an Aria Hummingbird clone and stick in on where the old one had been removed, apparently with a blowtorch. Just sanded and lightly filled the damaged top and stuck the new guard on with this adhesive. Easy, fast, and (so far) permanent.

Showing 10 of 66 Read more reviews >>
 


StewMac PDF Catalog, page 59 See 3M Pickguard Adhesive Sheet
on page 59 of our StewMac Digital Catalog