StewMac Stainless Steel Fretwire

StewMac Stainless Steel Fretwire

Our most popular fretwire sizes, now in stainless
Everyone loves stainless for its durability and longevity, plus it's easy to work with.

Get more miles between refrets
Stainless steel frets are slow to wear or develop grooves, so you get smooth string bends for years longer. Some players hear a slightly brighter tone with stainless.

Easier fret jobs
Unlike traditional fretwire, you don't need to "overbend" stainless steel wire. Curve it to your fretboard radius, and it stays put. The frets fit their slots without popping up, so less fret leveling is required.


from $8.45MIX + SAVE

Add to Cart Below
StewMAX Member Appreciation Event
10% OFF + FREE SHIPPING*

Limited Time Offer
Add 1-year StewMAX Membership to my cart for $39.95

For acoustic or electric guitar. The most popular wire for refretting Martin, Fender, Guild, Gibson and other guitars.

Medium/medium, 82-foot pack (1 lb)

Item # 0148-SLB
In stock, ready to ship!

$122.24

3 or more $103.90
+

Medium/medium, 2-foot piece

Item # 0148-S
In stock, ready to ship!

$8.45

3 or more $7.18
+

Dan Erlewine's favorite fretwire!
For acoustic or electric guitar. Combines extra width with extra crown height.

Medium/higher, 64-foot pack (1 lb)

Item # 0152-SLB
In stock, ready to ship!

$102.77

3 or more $87.35
+

Medium/higher, 2-foot piece

Item # 0152-S
In stock, ready to ship!

$14.37

3 or more $12.21
+

For electric guitar or bass. Modern "jumbo" fretwire used on ESP, Jackson, Ibanez, Kramer and similar guitars.

Wide/highest, 52-foot pack (1 lb)

Item # 0150-SLB
In stock, ready to ship!

$110.64

3 or more $94.04
+

Wide/highest, 2-foot piece

Item # 0150-S
In stock, ready to ship!

$12.68

3 or more $10.78
+
 
Total:
Qty:
Scroll to Top

StewMac Stainless Steel Fretwire

About This Item

Our most popular fretwire sizes, now in stainless
Everyone loves stainless for its durability and longevity, plus it's easy to work with.

Get more miles between refrets
Stainless steel frets are slow to wear or develop grooves, so you get smooth string bends for years longer. Some players hear a slightly brighter tone with stainless.

Easier fret jobs
Unlike traditional fretwire, you don't need to "overbend" stainless steel wire. Curve it to your fretboard radius, and it stays put. The frets fit their slots without popping up, so less fret leveling is required.



Medium fretwire is our most popular width and is used extensively by Martin, Fender and Gibson. If you're matching Gibson® "jumbo" fretwire from the late '50s, use our Medium width.

Wide fretwire is favored for string bending and is used on many modern electric guitars and basses.

Our fretwire is sized to fit a 0.023" (0.58mm) fret slot width.

Our fretting tools work well with stainless
All of our fretting tools are suitable for use on stainless-steel fretwire, with the exception of our Fret Tang Nippers. In our own shop, we find that this wire doesn't cause premature wear of files and sandpaper.

We supply our fretwire in 2-foot straight lengths. Order 6 feet for a complete guitar or bass fret job, and 4 feet for a mandolin, banjo or ukulele.

Order by the pound for tidy savings!
Our bulk fretwire is supplied in convenient clear storage tubes, to keep your wire organized and your workbench uncluttered. You'll save 50% or more when you order fretwire by the pound.


CALIFORNIA PROPOSITION 65 WARNING
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.


Customer Reviews

  • Excellent
  • Good
  • Average
  • Fair
  • Poor
Write a review
4.5
  • 4.54 average rating from 13 reviews
Sort by
5.0

Great products, great service!

By

Verified Buyer


I ordered stainless steel fret wire, received just what I needed, when it was scheduled, and couldn't be happier!

5.0

As descriped! Great stuff

By

Verified Buyer


I really like the feel of this material!

5.0

Great service

By

Verified Buyer


I had ordered fret wire for the first time got it in a timely manner and a great customer service thanks

5.0

Great upgrade.

By

Verified Buyer


Got the wide/highest wire, and was a great upgrade to my Les Paul. Hard to cut, but thats the whole point and why i bought it :). Found the best way to cut it was with a dremel, the rest with a file.

5.0

Hard

By

Verified Buyer


Great to have on a guitar.. But man its hard to work with.. The hardest part was to cut the frets.. I wish SewMac had some super clippers to do that.. I hurt myself cutting them xP But i hope all the work will payoff

5.0

Great Tele wire replacement

By

Verified Buyer


Client requested specific wire size for old Tele, chicken-pickin’ heaven.

3.0

Great fret wire once you clean the tape sticky off

By

Verified Buyer


On my order of this fret wire it was taped to the bottom of a box. The fret wire radiused well and went into the project well. Problem was getting all the adhesive sticky off the fret wire before I could radius or use it. Had to use Goo-B-Gone cleaner to get it off.

5.0

Stainless steel Fretwire

By

Verified Buyer


This is the perfect fret wire for all my instruments. Why is it called steel when it does not attract a magnet?

5.0

Tough stuff

By

Verified Buyer


Steel is a little harder to work with than silver/nickel (you'll need something tougher than standard snippers - a little bolt cutter works great), but if you do an intensive finger dance over these you're fingertips come out clean - so right away you appreciate how little wear there is.

5.0

SS frets

By

Verified Buyer


I only do Stainless steel fret work. I have done about 5 banjo's and 6 mandolins. Everyone likes
the brighter sound and the fact you will never have to re-fret again. I'm doing this for friends.

Showing 10 of 13 Read more reviews >>