Blush Eraser

Blush Eraser

Blush Eraser

Item # 1313
In stock, ready to ship!

$11.25

+
 
Total:
Qty:
Scroll to Top

Blush Eraser

About This Item

Eliminates the white clouding that appears when moisture is trapped in a new finish. Also useful for finish touch-up and repair.

When you spray a finish in humid conditions, a "blushed" (whitened) surface can occur when moisture becomes trapped in the finish. As soon as the blush appears, use Aerosol Blush Eraser to reflow the surface and free the trapped moisture. It preserves the clarity of the finish, and helps "melt-in" overspray after spot finish repairs, too. For use with nitrocellulose lacquer finishes only.

13-ounce aerosol spray can.


Customer Reviews

  • Excellent
  • Good
  • Average
  • Fair
  • Poor
Write a review
4.5
  • 4.68 average rating from 31 reviews
Sort by
Displaying 2 of 4
1 2 3 4
5.0

Great product, Greater People!

By

Verified Buyer


I am new to all this and lost! Got moisture trapped in lacquer job and didn't know what to do. Not only did the staff recommend this amazing product, but took the time to explain why I had the issue, how to fix it, and how to avoid it in the future. I will buy all my products here!

5.0

Just go lightly

By

Verified Buyer


I made the mistake of putting this on too heavy and it wrinkled my lacquer clear coat, but that was my error. I used it lightly on other areas and it worked perfectly. Gets rid of blush and flows out what's there

5.0

Amazing Product

By

Verified Buyer


The humidity rose dramatically when I was spraying my 6th coat of nitrocellulose lacquer on the neck and body of a electric guitar I am building. Within an hour the moisture in the air created a milky, hazy cloud on all the sprayed surfaces. I thought my finish was ruined and all my hard work was for nothing. But I contacted Stew-Mac (they responded to my email really quick) and they suggested I apply Blush Eraser to the finish to correct it. I was totally skeptical but what did I have to lose at that point. I bought the stuff, applied it and within minutes, it completely eliminated the issue! The finish looks back to normal. What a phenomenal product! It even corrected some "lacquer spit" high spots. The blush eraser re-flows the lacquer giving the high spot a chance to settle smooth and that will save time in sanding. Blush Eraser is definitely a MUST HAVE product to have on hand for anyone building or finishing guitars.

5.0

Should be called nitro mistake eraser!

By

Verified Buyer


This stuff works for its intended purpose of erasing blush caused by spraying during high humidity, but it also does so much more! I used a heavier coat of it to blend in small fish eyes, bubbles, and drips, I re-softened an almost cured coat of clear to remove a trapped hair, and most recently I laid down a very light coat of it over my last coat of clear and it seemed to minimize orange peel! As someone who does guitar refinishing in my back yard, I will never spray nitro again without a can of this stuff handy.

5.0

Saved my backside!!!!

By

Verified Buyer


I built a guitar for a customer while he was overseas. I went over it one last time because he was coming in 2 days to get it. Murphy's Law was right on time. I had 3 spots that had blushed. I gave them each a short shot of Blush Eraser and in no time it was gone. So I got out my Micro Pads from StewMac and got the shine right back where it should be. Thanks StewMac. Russ

5.0

must have

By

Verified Buyer


This is a must have for anyone refinishing anything with lacquer. Most of my jobs are done in my garage, and in TN the humidity will kill you. This has saved more than one project.

5.0

Can't work without it

By

Verified Buyer


My spray area is not air conditioned and the humidity can get awful. When I spray lacquer in that environment, it forms a haze under the fresh coat. Stew-Mac's Blush Eraser removes the haze immediately. I move the piece into the house to hang and finish drying normally. It only takes a mist or two for it to work. One can lasts through about two complete guitar finishes. Consider I mist between every coat, color tone and clear. I have also noticed that a mist of Blush Eraser brings out the "wet look" on a fresh coat of lacquer and seems to dry more evenly. I would not start a spray project without it. The instrument in the photo has 10 coats of gloss over a Color tone burst, and has not been wet sanded or rubbed out and polished yet.

5.0

Must have for lacquer

By

Verified Buyer


I made the mistake of spraying lacquer on a mandolin project on a high humidity day. It immediately blushed. I sprayed the blush eraser on and it disappeared. Great product!

5.0

thankful!

By

Verified Buyer


This is awesome stuff! I was redoing a paint job on my Squier Jaguar on an extremely humid day, it looked like it had snowed on the guitar,I thought it's ruined,start all over.That was a Sunday,so I ordered it right away! Got here on wednesday and I sprayed it on one corner.........wow...a miracle,my blue sparkle came shining through! Thanks for this,you saved my guitar!

3.0

Didn't help but it was a long shot

By

Verified Buyer


I got some blushing when I was applying Nitro sanding sealer on a very humid day. I decided to try the blush remover product but it was 5 days after I sprayed when I got it. It didn't work so I had to sand off the sealer and start again. It would have been great if it had worked but it was a long shot so I don't fault the product, just my bad timing.

Displaying 2 of 4
1 2 3 4