Pickup Routing Template for P-90

Pickup Routing Template for P-90

For body rout

Item # 2260
In stock, ready to ship!

$15.74

+
 
Total:
Qty:
Scroll to Top

Pickup Routing Template for P-90

About This Item

Create perfectly shaped pickup cavities every time.

Accurate template placement is easy—crystal clear routing templates allow you to see the guitar body underneath. Simply align the template's laser etched centerlines with the markings on your guitar to get the placement right every time.

StewMac's improved templates are now thicker with smooth laser-cut edges. Correct depth measurements are etched right on the template, so you don't need to puzzle over cavity dimensions, we've done that work for you.

"These improved, thicker templates mean I don’t have to shim or double up templates to get contact with the router bearing."
—Erick Coleman, guitar repairman and StewMac tech advisor

Pickup Routing Template for P-90 is for routing the body cavity at the neck or bridge. This template works for both dog-ear and soap-bar mountings.

  • Thickness: 3/8" (9.53mm)
  • Outer dimension: 5-7/8" x 3-7/8" (149.22mm x 98.42mm)
  • Clear acrylic
  • Laser etched centerlines and depth measurements

Create precision cavities every time: Align the template’s centerlines with those you drew on your guitar. All you need is Double-stick Tape to keep the template in place. Optional: use flat head screws dropped into the counter-sunk holes—the router glides right over them. Use the Bosch Colt Router to lower your Ball-bearing Router Bit into the wood and make several shallow passes until the bearing rides smoothly along the template edge. When the bearing can ride against the cavity wall, remove the template so you can rout to the recommended depth engraved on your template.



CALIFORNIA PROPOSITION 65 WARNING
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.


TOOLS TO USE WITH ROUTING TEMPLATES

Previous Next

Customer Reviews

  • Excellent
  • Good
  • Average
  • Fair
  • Poor
Write a review
4.5
  • 4.60 average rating from 5 reviews
Sort by
5.0

Solid Routing Template

By

Verified Buyer


This template is solid, thick, and well marked.

4.0

Could be perfect…

By

Verified Buyer


This would be a perfect tool but for one detail. I used it to cut the cavity for a neck pick up on a guitar which was a single pick up model. As is, the template would have to sit on top of the end of the fretboard as the pick up needs to be flush with the end.I cut out a section of the template to wrap the end of the fretboard and it worked perfectly. The center lines were very helpful in placement. If you cut out the long end as I did, be sure to keep the side with depth chart intact. With the cutout, it will still work perfectly for the bridge pick up. You will only have to cut three sides and all the corners and then reverse the template to get the remaining long edge.

4.0

Too small for Dimarzio

By

Verified Buyer


A little too small for the Dimarzio p90.
Virtual p90

5.0

P-90 routing template

By

Verified Buyer


I haven't used it yet. I like the thickness, the scribed center line, and the depth information.

5.0

Make Life Easy!

By

Verified Buyer


I have many Stewmac Routing Templates. Well made and accurately cut. Way easier than making my own which I have in the past.

 


StewMac PDF Catalog, page 58 See Pickup Routing Template for P-90
on page 58 of our StewMac Digital Catalog