Neck Joint Router Bits

Neck Joint Router Bits

Neck Joint Router Bits Dovetail

Dovetail

Item # 4781
In stock, ready to ship!

$35.32

+
Neck Joint Router Bits Straight cut

Straight cut

Item # 4782
In stock, ready to ship!

$35.32

+
 
Total:
Qty:
Scroll to Top

Neck Joint Router Bits

About This Item

We developed these tools for cutting accurate neck joints, available for a traditional Martin dovetail, or for a straight mortise and tenon.

Each custom made cutter bit is carbide-tipped for long life. 1/4" shank and a 1/2" guide bearing. Designed for use with the Acoustic Neck Joint Routing Templates.

#4781 Dovetail bit
Overall length 2-9/16" (65.09mm)
Shank length 1-1/2" (38.10mm)
Maximum cutter diameter 9/16" (14.29mm)
Cutting length for
10-degree dovetail angle
13/16" (20.64mm)

#4782 Straight cut bit
Overall length 2-5/16" (58.74mm)
Shank length 1-1/2" (38.10mm)
Maximum cutter diameter 1/2" (12.70mm)
Cutting length 13/16" (20.64mm)


CALIFORNIA PROPOSITION 65 WARNING
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.


Instructions

Product Instructions

Acoustic Neck Joint Routing Template Instructions

Routing instructions for acoustic neck joints.

Customer Reviews

  • Excellent
  • Good
  • Average
  • Fair
  • Poor
Write a review
5.0
  • 4.85 average rating from 13 reviews
Sort by
5.0

productos de muy buena calidad

By

Verified Buyer


para realizar mis proyectos con mucho más rapidez y facilidad, (para ser honesto cheque varios cortadores y ninguno ofrecía la calidad de la tienda StewMac).

5.0

Don’t forget to buy more bearings

By

Verified Buyer


This bits cut well, but damn it, I wish you sell more of these bearings. When routing the bearings shift up and down. Great tool but can be better. Thank God for the reduced shank.

5.0

Les Paul Neck Joint:

By

Verified Buyer


I took the first cutter and put in to my plunge router and adjusted it to the desired depth. For the first time I got to try out my newly made Les Paul router template that I had made. The first cut was completed successfully. The I took the second cutter and put it into my finish router. Carefully I set it to the finish depth. All that was left is to follow the template and make a rough cut followed by a second pass to clean up the cavity and try how the neck fits the body. It was very exciting as I slid the new neck into it's cavity and fit, Walla! It fits. I had to position the neck square to the body because of the tight fit. Today I put the 10 layers of finish on the neck. Tomorrow the neck will be ready to glue in for final fit. Thanks for your help.

5.0

Quality cutter!

By

Verified Buyer


I bought this to cut tenons for guitar necks and was very pleased with the results. The razor sharp carbide edges cut easily and cleanly through the end grain.

5.0

Great Quality Stewmac!

By

Verified Buyer


I have been using these for years and they really deliver.

5.0

Great!

By

Verified Buyer


The dovetail bit works perfectly!

5.0

Cuts great

By

Verified Buyer


Used this on two guitar builds so far so good. we wilol see how long it lasts.

5.0

Perfectly clean cut

By

Verified Buyer


I used the straight bit with the template. The cut was very clean and precise

5.0

Neck Joint Router Bits

By

Verified Buyer


These router bits are extremely sharp and easy to cut with. I am able to make perfectly fitting joints with these because they cut so smoothly & cleanly without burs. These bits execute flawless perfect patterns outstanding results every time. I love working with quality tools and equipment, thanks for including these tools, supplies and accessories in you warehouse. You hold all of the proper materials any builder would ever want or need! My wife might hate you, but I LOVE you! hahahahah

5.0

Great

By

Verified Buyer


Like all the bits Stew Mac offers, these are great.

You shouldnt be let down.

Showing 10 of 13 Read more reviews >>
 


StewMac PDF Catalog, page 46 See Neck Joint Router Bits
on page 46 of our StewMac Digital Catalog