Money-saving set of 18 for the repair shop. Our veteran guitar technicians developed these high quality steel wrenches.
You'll find the right tool you need to perform truss rod adjustments more efficiently. Our money-saving set includes durable bench tools for the repair shop, and pocket-size truss rod wrenches that fit into your guitar case.
Wrenches are also sold separately.
"These wrenches are great! They stay in my travel pack. When I meet artists/customers on the road, I have to be prepared for anything. I recommend this set to any pro tech."
—Kelly Butler, Manager and Chief Luthier, First Act
SAVE on the set of 18. Here's what you get:
(3) Hex truss rod wrenches: 10-3/4" (27.31cm) length keeps your knuckles safely away from the peghead. Comfortable rubberized handle. For 5/16" (Gibson), 9/32" and 1/4" hex nuts.
Hex wrenches are also sold separately.
(5) Allen truss rod wrenches: 12-1/2" (31.75cm) length gives plenty of peghead clearance. The Allen ball end also works at an angle, for getting into a recessed truss rod access cavity. Comfortable rubberized handle. For 1/8", 4mm, 3/16" and 5mm Allen nuts. Plus a 1/8" bent wrench for tuner clearance on 6-in-line pegheads.
Allen wrenches are also sold separately.
(5) Soundhole truss rod wrenches: Right-angle tools for easily adjusting an acoustic guitar neck through the soundhole. Comfortable rubberized handles. The Allen ball end lets you tilt the wrench for clearance over the top bracing when needed. The 4mm wrenches are for Hot Rod truss rods. Two 5mm wrenches adjust Martin guitars: the 2" (50.80mm) reach for pre-August 2007 Martins, and 4-1/2" (114.30mm) reach for Martins made after that date.
Soundhole wrenches are also sold separately.
Truss rod wrench for Fender: The 3/8"-wide (9.52mm) flat blade has the right taper and size to adjust a traditional Fender truss rod efficiently, without marring the nut. 10-3/4" long (27.31cm), with comfortable rubberized handle.
Fender wrench is also sold separately.
(3) Pocket truss rod wrenches: Compact tools 3/4" (19.05mm) long socket to fit into small access cavities like newer Gibsons and PRS. We've also rounded all of the edges to prevent scratching the finish. Wrenches for 1/4", 9/32", and 5/16" hex truss rod nut sizes.
Pocket wrenches are also sold separately.
Truss Rod Crank for Tele: StewMac exclusive! Finally the right tool for the job: a small crank-action steel wrench made for heel-adjustable slotted truss rod nuts. A vintage-style Tele® requires only simple pickguard removal. Straight and diagonal ends let you work without unstringing the guitar. Compact 3-9/16" (90.49mm) length lets you get the precise control you need.
Truss rod crank for Tele also sold separately.