Economy 3-on-Plate Tuners

Economy 3-on-Plate Tuners

Buy more, save more!

Economy 3-on-Plate Tuners

Item # 0934
In stock, ready to ship!

$10.94

3 or more $9.41
10 or more $7.99
+
 
Total:
Qty:
Scroll to Top

Economy 3-on-Plate Tuners

About This Item

For solid or slotted peghead steel-string guitars. These inexpensive open-gear tuners will make that yardsale special playable again!

They're versatile: the 1/4" (6.35mm)-diameter string posts have double holes, so you can install these tuners on solid or slotted pegheads. Nickel-plated with white plastic knobs.

1-3/8" (34.93mm) string post spacing, 14:1 gear ratio. Complete set of 3-left, 3-right. Mounting screws included.

Installation Tips

Mounting screws: Pilot holes required. Installing delicate screws into hard wood requires great care and accuracy. We highly recommend the #1711 Depth-stop Drill Bit (No.50 bit) for the pilot hole before installing these screws. Lubricate the screw threads with cutting lubricant (also wax or a bar of soap) to reduce friction and help them thread properly.



CALIFORNIA PROPOSITION 65 WARNING
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.


    • Item #
    • Weight
    • 0934
    • 0.3110 lbs. (0.14 kg)

Customer Reviews

  • Excellent
  • Good
  • Average
  • Fair
  • Poor
Write a review
5.0
  • 4.74 average rating from 86 reviews
Sort by
Displaying 2 of 9
1 2 3 4 5 6 7 8 9
5.0

Harmony Guitar

By

Verified Buyer


Used to replace the tuners on an old Harmony Guitar. Fit perfectly. Had to fill and drill the mounting holes but wasn't a big deal. The mounting screws that were included did not strip out like most kit screws.

5.0

Great for price

By

Verified Buyer


Bought for an old beginner model. Had to drill out holes but otherwise perfect.

5.0

Inexpensive but not cheap tuning machines

By

Verified Buyer


4th set I bought and still amazed that the quality is so high for tuning machines priced so low.

5.0

replacement tuners

By

Verified Buyer


Great deal at the price. They were a perfect fit on a 70s era Korean steel string.

5.0

Very pleased with the product!

By

Verified Buyer


My parts just came in today! Im restoring an old 60's guitar and the plates and pegs are like new! it goes really well with the other hardware I got for it. It brings a little life to a piece that hasn't been played in a while. I will most certainly be ordering from here again for alot of my guitar needs. Thank you guys!

4.0

OK for the money

By

Verified Buyer


Got these to replace broken tuners on a low end 60's Kay. Had to ream out the post holes as these had slightly larger diameter pegs than originals. Mounting screw holes didn't line up but I knew that would be the case from the spec's. These are not ideal for standard (non-slotted) peg heads as the posts don't have any relief and strings tend to ride up the straight shaft. That said I didn't want to invest +$20 on a $50 guitar and these did the job, now I have decide if it is worth a neck reset.

5.0

Fit perfect and works great on a Global guitar from the early 70's.

By

Verified Buyer


Fit perfect and works great on a Global guitar from the early 70's. Very happy with these tuners. They are also identical to the tuners that I have on a Harmony guitar from 1966.

5.0

Perfect fit

By

Verified Buyer


Found an old student sized guitar with bent and broken tuners. These fit perfectly and did a good job on this inexpensive guitar restoration.

4.0

Simple swap

By

Verified Buyer


Better than what they replaced on the kids’ 3/4 size Guitar. Just took some measurements before purchasing.

5.0

As expected

By

Verified Buyer


Exactly what I was looking for. Look fancy enough and work great.

Displaying 2 of 9
1 2 3 4 5 6 7 8 9
 


StewMac PDF Catalog, page 82 See Economy 3-on-Plate Tuners
on page 82 of our StewMac Digital Catalog