Schaller Non-Tremolo Roller Bridge

Schaller Non-Tremolo Roller Bridge

Buy more, save more!
Schaller Non-Tremolo Roller Bridge Chrome

Chrome

Item # 0577
In stock, ready to ship!

$68.96

3 or more $62.75
+
Schaller Non-Tremolo Roller Bridge Black

Black

Item # 0577-B
In stock, ready to ship!

$80.45

3 or more $73.21
+
Schaller Non-Tremolo Roller Bridge Gold

Gold

Item # 0577-G
In stock, ready to ship!

$91.95

3 or more $83.67
+
 
Total:
Qty:
Scroll to Top

Schaller Non-Tremolo Roller Bridge

About This Item

A highly adjustable non-trem Strat inspired bridge that doesn't require through body stringing or string grommets.

Low-friction roller saddles adjust for intonation and height, and for string spacings from 2" to 2-3/16" (50.80mm to 55.56mm). A cam screw locks the saddles to the grooved baseplate. The strings mount at the rear of the bridge. Screws included.

The saddles and the 2-13/16" x 1-15/16" (71.44mm x 49.21mm) baseplate are brass. A removable 1/8" (3.00mm) spacer is included for raising the baseplate height if needed. Use a .050" allen wrench to adjust the saddle heights from 3/8" to 17/32" (9.53mm to 13.49mm) from the guitar body (E string positions).

Positioning the bridge
Find bridge placement for any scale with our free online tool fret position calculator.



CALIFORNIA PROPOSITION 65 WARNING
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.


    • Item #
    • Weight
    • 0577
    • 0.4340 lbs. (0.2 kg)
    • 0577-B
    • 0.4340 lbs. (0.2 kg)
    • 0577-G
    • 0.4340 lbs. (0.2 kg)

Customer Reviews

  • Excellent
  • Good
  • Average
  • Fair
  • Poor
Write a review
5.0
  • 4.86 average rating from 50 reviews
Sort by
3.0

Nice bridge but some design and QC issues

By


This bridge works well...solid, easy to string, very adjustable, good price. Only 3 stars for a few issues. First, several of the saddle height adjustment screws were frozen in place. After inadvertently rounding off the hex wrench with a little too much torque, I had to remove the saddles and soak them in lubricating oil for a while. Second, there is a baseplate attached to the bottom of the unit. It looks like part of the unit, and there Is no documentation provided. After installing, my action was too high and I had to remove everything and start over after removing the shim. Lastly, (and the least issue), the intonation screws are flat head. Phillips would be a lot easier to use in this installation, since you have to remove a few saddles to install. A couple of small changes and some documentation would make this a better unit.

Response from StewMac


Hello Madison,
We apologize for this issue with our Schaller Non Trem Roller Bridge. Thank you for sharing your honest feedback with us. Our technical and R&D departments are working to get this fix as soon as possible. If you would like to speak with our Customer Support Team about this product, feel free to give us a call at 1-800-848-2273. We look forward to helping you with this.

4.0

Well made

By

Verified Buyer


This is an excellent bridge for the price; good value !

5.0

Clanking Sound No More

By

Verified Buyer


I put this bridge on a Modern Player Tele that I also put a Rose Wood 21 fret Mighty Mite neck on, & before these two alterations, this tele was nothing but a clank of string noise: not rattles or busses -- those are typically easy to adjust away; however, this was a clanking string noise that must have been in my imagination, before I made these alteration, & now, I am no longer imagining these clanking's -- that nobody heard or believe existed in the first place - sort of strange, it all will & fine for some to change or question the factory setting, while if others ask question them, they're immediately consider wrong.

This bridge & new mighty mite neck did something else too. After I filed, the adjustment screw for the g string & b string a bit shorter -- it is the fist time since I own this tele modern player that I actually like playing it: no clanking string noise & it stays in tune. So yeah I love this bridge; it made a guitar that was horrible to play because of the string clanking noise into my favorite guitar to play, for the body always has a good sound albeit it was difficult to tell through all the string noise that was in my imagination.

5.0

Excellent

By

Verified Buyer


Got this for my wide neck Big Lou Cobra. Never had much use for a wham. Had to have the side to side for the wider string spacing. Worked out great!

5.0

The Best Parts

By

Verified Buyer


StewMac handles nothing but the best parts available!

5.0

beautiful piece of hardware

By

Verified Buyer


This is a well made beautiful combination tailpiece and bridge. Fully adjustable. Looks great!

5.0

German Craftmanship

By

Verified Buyer


Well designed bridge. Close tolerance, solid chrome finish and spot on fit.

5.0

Nice Bridge

By

Verified Buyer


Really nice piece of German design and manufacturing. The finish is great and the design allows for easy adaptation to different neck/body configurations. I am still in the finishing stages of my latest build and looking forward to installation. I really like the top loading feature.

5.0

Schaller roller bridge

By

Verified Buyer


These are great bridges. I installed one on an old P-Bass. I like it so much I bought one for a Strat project. You'll need to install a block of wood where the stock Strat tremolo was.

5.0

Perfect stratocaster hardtail bridge

By

Verified Buyer


I ordered this bridge because of the advertised adjustability of the string spacing. The mounting with only three screws was not difficult, although I did have to sand the underside of the bridge at the mounting holes because some small burrs were present. It then sat flat against the body with no edge gaps. I did not have to use the spacer that is provided, but it fit perfectly and would probably be needed for some installations. I adjusted the string spacing to be slightly narrower than standard. Adjusting for intonation was easy to get dead-on, but would have been much better if the screws provided were phillips head instead of straight. The cam screw locks everything into place when you're done. This is a great looking bridge and easy on the palm. I'll definitely use it again on my next hardtail.

Showing 10 of 50 Read more reviews >>
 


StewMac PDF Catalog, page 92 See Schaller Non-Tremolo Roller Bridge
on page 92 of our StewMac Digital Catalog