Spring Cavity Cover

Spring Cavity Cover

Buy more, save more!
Spring Cavity Cover White

White

Item # 0082
In stock, ready to ship!

$4.17

3 or more $3.54
+
Spring Cavity Cover Black

Black

Item # 0082-B
In stock, ready to ship!

$4.17

3 or more $3.54
+
Spring Cavity Cover Mint/black/mint

Mint/black/mint

Item # 0082-M
In stock, ready to ship!

$6.86

3 or more $5.83
+
Spring Cavity Cover Pearloid/white/black/mint

Pearloid/white/black/mint

Item # 0082-P
In stock, ready to ship!

$11.11

3 or more $9.44
+
Spring Cavity Cover Tortoise/mint/black/mint

Tortoise/mint/black/mint

Item # 0082-T
In stock, ready to ship!

$11.54

3 or more $9.81
+
 
Total:
Qty:
Scroll to Top

Spring Cavity Cover

About This Item

Cover for traditional tremolo routs on Strat® and other guitars and tremolos. Screws sold separately.

Item# Description Width x length String hole spacing
0082 White 3-3/8" x 5-7/16" (86mm x 138mm) 2-3/16" (55.5mm)
0082-B Black 3-3/8" x 5-7/16" (86mm x 138mm) 2-3/16" (55.5mm)
0082-M Mint 3-21/32" x 5-11/16" (93mm x 144.5mm) 2-1/4" (57mm)
0082-P Pearloid 3-21/32" x 5-11/16"  (93mm x 144.5mm)   2-1/4" (57mm)
0082-T Tortoise 3-21/32" x 5-11/16"  (93mm x 144.5mm)   2-1/4" (57mm)

Customer Reviews

  • Excellent
  • Good
  • Average
  • Fair
  • Poor
Write a review
2.5
  • 2.50 average rating from 34 reviews
Sort by
2.0

too small

By

Verified Buyer


size did not match described dimentions. holes did not line up. corners were too sharp, not curved enough. after sanding down the north side, it fit front and back ways, but there was still about 1mm gap on both sides. (too skinny) This was going on a Jackson DK2 Dinky

1.0

Fit

By

Verified Buyer


Didn't match the holes on my guitar, a little too small

Response from StewMac


Hi Kevin,
We're very sorry the Spring Cavity Cover wasn't the right fit for your guitar. Quality and 100% Total Satisfaction is our goal every day. If a product fails to work as intended on your instrument, we'll take back the product and replace it or refund you for it. Please call us at 1-800-848-2273 so we can make this right.

5.0

Great 1-ply covers!

By

Verified Buyer


I purchased both the black and white single-ply covers and I must say they are the best non-licensed single-ply covers I have purchased yet! They are thick, have a plastic film to protect it, are not roughly cut, and have no serious scratches. Just like the paired pickguards, the only complaint I have is the 'Made in Korea' sticker leaves an annoying residue, but it comes off easily with soap and water.

2.0

black cover

By

Verified Buyer


I don't know about the other colors, but the black is a bit thin.
No fault to StewMac here as I am seeing all the lower priced , Korean soursed plastic are low grade. It does the job and that is all it has to do.

1.0

Too thin

By

Verified Buyer


Building a fender style guitar. Didn't want to make a cover from scratch. Read the reviews about screw holes not lining up. Not a problem, I can place the screws wherever.....I'm building it. The part came in, and it no thicker then the pickguard material that I bought from Stewmac. Happened to buy a Fender version for a 2nd build, and that one is the same thickness as the other cavity covers that stewmac sells. Cheap material that is way to thin for it's purpose.

1.0

These do not fit a Squier SE

By

Verified Buyer


I too wish I had read these reviews rather than assuming they would fit my particular guitar. The most serious problem with this is that the string holes are not spaced properly. If you just cut the item and have an open rectangle, as some variations of this product show, then you would have to drill six new holes to make this work. If you try to reuse two holes, then the cover does not fit over the opening.

1.0

Should have heeded the reviews

By

Verified Buyer


This is a good spring cavity cover, but it doesn't fit the cavity of my Squier Strat Standard, nor do the screw holes line up. If you are building a guitar, this will work, but it doesn't work as a replacement cover. Unfortunately Stew Mac only has one supplier for this item so.....

1.0

Screw holes

By

Verified Buyer


The screw holes on these did not line up with the holes on my brother in laws strat that I am working on. Too bad.

5.0

perfect fit for my MIM strat

By

Verified Buyer


perfect fit for my MIM strat

5.0

Cover posteriore

By

Verified Buyer


Eccellente

Showing 10 of 34 Read more reviews >>
 


StewMac PDF Catalog, page 38 See Spring Cavity Cover
on page 38 of our StewMac Digital Catalog



  • Stratocaster® and Strat® are registered trademarks of Fender Musical Instruments Corporation.