Wilkinson/Gotoh VSVG Vintage Tremolo

Wilkinson/Gotoh VSVG Vintage Tremolo

Buy more, save more!
Wilkinson/Gotoh VSVG Vintage Tremolo Nickel

Nickel

Item # 3534
In stock, ready to ship!

$110.23

3 or more $98.10
+
Wilkinson/Gotoh VSVG Vintage Tremolo Black

Black

Item # 3534-B
In stock, ready to ship!

$127.63

3 or more $113.59
+
Wilkinson/Gotoh VSVG Vintage Tremolo Gold

Gold

Item # 3534-G
In stock, ready to ship!

$131.63

3 or more $117.15
+
 
Total:
Qty:
Scroll to Top

Wilkinson/Gotoh VSVG Vintage Tremolo

About This Item

Improved Strat tuning stability, sustain and reliability!

The baseplate holes are elongated so the screws won't bind, for smooth, accurate pitch return. For tuning stability, the string mounting holes are staggered in the steel block for more consistent string angle over the adjustable locking bent-steel saddles.

2-1/8" string spread.

Includes:
Springs, spring claw, arm with white plastic knob (#3534-B black tremolo has black plastic knob), mounting screws, saddle adjustment screw and Allen wrenches.

Positioning the bridge
Find bridge placement for any scale with our free online tool fret position calculator.



CALIFORNIA PROPOSITION 65 WARNING
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.


    • Item #
    • Weight
    • 3534
    • 0.9500 lbs. (0.43 kg)
    • 3534-B
    • 0.9400 lbs. (0.43 kg)
    • 3534-G
    • 0.9460 lbs. (0.43 kg)

Customer Reviews

  • Excellent
  • Good
  • Average
  • Fair
  • Poor
Write a review
4.5
  • 4.61 average rating from 31 reviews
Sort by
3.0

Alternative replacement for the crap Fender bridge.

By

Verified Buyer


This is a review since I bought it in 2007. The tremolo arm is a bit too low, once you slot it in it will glide in and touch the volume button. I have to bend it higher but it will bend back after long time use.
You must make sure that you don't lose the separate intonation screw.
My string always breaks on the saddle part. I use D'addario stainless steel strings.
I've moved on to another bridge now in 2019.

5.0

Kurt Amschler

By

Verified Buyer


I built a Warmth Strat with a 24.75 inch (Gibson) conversion neck. This results in a 12th fret that sits a TINY bit closer to the body. This requires a bridge whose saddle have a bit more rearward travel (toward the strap knob) than a regular Strat bridge can reasonably handle. The Wilkinsin VSVG is perfect in that, its saddle are capable of this.

Thanks,
Kurt Amschler

5.0

Best bridge I’ve ever used!

By

Verified Buyer


As always I received great service from stewmac.com!

5.0

Best Bridge Ever

By

Verified Buyer


Note: This made to drop-in Fender guitars.

I put this in my Squier Bullet and Affinity series as a replacement bridge. I had to do some routing and chiseling on both. But more on my Bullet due to the thin body.
Nothing too technical for careful planning, and a straight line chisel.
I had to dig out the bridge cavity on the top about 1/2" and the bottom cavity about 7/8" to give the bridge full motion.
The screw hole alignment didn't match exactly on either, but it was close enough to where I could fill the "off" holes with wood glue and redrill it, which was only one hole per guitar.
Will have to scratch up spring claw to solder a ground to it.
Adjustment screw for the arm is reachable if you "dive" the arm.

TLDR;
Best bridge I've ever owned. It's sturdy and holds tuning really well. Big block sounds much better than the stock block.

5.0

Fast delivery to Finland.

By

Verified Buyer


High quality, good adjustment possibilities, great sound.
Best regards,
Play Me Custom Guitars.

5.0

Not really a vintage

By

Verified Buyer


The item is excellent and this is my second buy. The screw are hex that it looks modern. The dimension fits the the vintage body cavity. It has a bigger tremolo block that it has to be routed a little at the rear to maximize the full potential of the tremolo.

5.0

Awesome!

By

Verified Buyer


I installed it on my Kramer and looks awesome!
Easy to adjust but take a little more time than the Fender. The results (tuning, sustain...) worth it!
I love it!
By the way, the picture was taken before adjustments.

5.0

Great trem!

By

Verified Buyer


I installed this on a body drilled for a vintage Fender bridge. Holes lined up well and trem operates flawlessly. All of the little adjustments take a bit more time than a regular bridge but the results are more than worth it. The guitar now stays in tune even with fairly aggressive trem work. The sound is also excellent. The bar adjustment works well and the bar is set at a near perfect angle.

2.0

Ok but

By

Verified Buyer


Last time...The sound is strange little think....not easy for intonation...lot of funny ajustement and tools lol please kick me if i order again!!!

5.0

Vintage Tremolo

By

Verified Buyer


Fast delivery Excellent condition

Showing 10 of 31 Read more reviews >>
 


StewMac PDF Catalog, page 93 See Wilkinson/Gotoh VSVG Vintage Tremolo
on page 93 of our StewMac Digital Catalog



  • Stratocaster® and Strat® are registered trademarks of Fender Musical Instruments Corporation.