Stewart-MacDonaldEverything for building and repairing stringed instruments!
Your order cart Your order | Account | Saved list
Sign in
Email
800-848-2273, 9AM-6PM EST, M-F
Home Free catalog Quick order International Customer service

Home : Trade Secrets Archive : Issue 158, Bridge collapse! Carving an archtop guitar bridge in a hurry!
Trade Secrets NEWSLETTER
Email a friend









 Processing...






HELP! text messageEmergency!
National Debonaire guitar
Guitar at the door Erick Coleman, February 16, 2012
Bridge carving in a hurry
I received a late-night text message from my customer: he was getting ready to travel to a recording session in Chicago the next afternoon. That's when he noticed that the bridge on his late-50s National Debonaire archtop had caved in. He was in a real pickle, and asking if there was anything I could do on such short notice?
In our shop, the working musician gets priority. We can do this! The guitar was waiting at my door first thing in the morning, and I started right in.
Erick Coleman
The Debonaire is a cool guitar indeed. Built by the Valco company, it has those neat tuner knobs and Valco’s famous Vista-Power pickup.
The Z-patterned bridge is the compensated version you find on many Valco-built guitars, like Airlines and Supros. Even if I could find a replacement for the broken top of this bridge, there’s no time to order one. Glue won't hold it (and could change the tone), so I'll have to carve a replacement from scratch.


See our Trade Secrets archive
It’s no surprise that this bridge broke. The adjustable top was quarter-sawn widthwise, and string pressure over many years caused it to break along a grain line. I'm guessing this was made out of shop scrap. Still, it was a strong enough piece of wood to last for over 50 years before finally giving in!
 
I had a rosewood acoustic bridge blank on hand. You can see here that it's big enough to cut up into about six flat-sawn archtop bridge tops.
Flattop Guitar Bridge Blank
See bigger photos on our Facebook page
Measure and cut  
I measured the width of the original bridge and thickness-sanded the blank to match it. I marked it out for trimming into three pieces the size of a bridge top, but didn't cut them apart yet...
 
Before cutting apart my three small blanks, I drilled my post holes based on this measurement from the original bridge. This way, I drilled the holes for 3 bridges in one shot, saving a little time if I end up making more than one.
Luthier's Digital Caliper
My drilled blank is a perfect fit. Before shaping it, I shaped the top to match the Debonaire’s 12" radius. I used a radius gauge to mark that curve onto my blank, then roughed-in the radius on my belt sander.
Radius Gauges
I marked out the zigzag compensation lines with a white pencil, using the original bridge as reference.
 
I gently clamped the blank into my nut and saddle vise to start removing wood with my razor files.
Nut and Saddle Vise
Filing Razor Files
With the original bridge as my guide, I started razor-filing the treble side of the blank and worked my way across, following my pencil lines. When I was close I flipped the blank over and roughed-in the opposite side.
 
Here’s my roughed-in bridge (at right in the top photo). Now I’m ready to clean things up and dial in the final shape. Using some of my luthiers files along with micro chisels and mini scrapers, I copied the original until my lines were clean and closely resembled zig-zag compensation shape of the original.
The lower photo at left shows my finished work. I sanded it to 400 grit, then used some Preservation Polish to condition the wood. I'll add the string slots next, using the the old bridge as my guide, then this replacement will be good to go.
Luthier's File SetMicro ChiselsScraper Blades
And here it is on the Debonaire’s bridge base, strung up and ready to roll.
This was done in plenty of time to hit the road for Chicago and its recording session!
 
   
Problem-solving products for this kind of work:
Razor Files
The sharpest fine-cut woodworking files we've ever used.
Radius Gauges
Notched design reads the fretboard with the strings on! Make sure you keep the right curvature when working on a fingerboard.
Flattop Guitar Bridge Blank
Ebony and rosewood rectangular undrilled blanks for custom replacement work.
More More More
Micro Chisels
Set of four model maker's chisels, for trimming nut and saddle slots or for removing dried glue around braces and frets.
Luthier's File Set
Quality files for jobs that are too big for needle files. The set includes round, flat, square, half-round and 3-corner files.
Nut and Saddle Vise
A better way to hold nuts and saddles for easier, faster shaping.
More More More

Toll-free order line:   800-848-2273   9am-6pm Eastern Time, M-F



Your order | Your account | Trade Secrets E-mail Newsletter
Home | Free catalog | Catalog Quick Order | International | Customer service
Our guarantee | Shipping | Security & Privacy | Contact us
Site map | About Us | Employment
© Copyright 2014 Stewart-MacDonald
Your shopping is secure with VeriSign! Trusted Commerce