Soundhole Clamps

This clamp is lightweight yet strong, and it can apply more than enough clamping pressure to get the job done when needed. Some kind of a support is required at the clamping feet, because it is very small and you'll damage parts if you're not careful. I now use them exclusively for bridge glue-ups. The only thing I don't like so much about them is the price...

I recently bought 3 7" soundhole clamps, they were delivered quickly and they work really well, a top piece of equipment.

The clamps made my life so much easier. Thanks to Stew Mac for having the right part for the job. Just like a good auto parts place, can't beat them!

Perfect!! The right tool for the right job!!

Seemed a bit flexible at first. Leveling screw binds when clamp is under tension. But set the leveler first and then the clamp and it works like a charm. Lightweight, essential repair/builder tool.

These clamps did an excellent job in gluing the bridge on a tenor ukulele. Adding 3/8 inch self-stick felt pads to each clamp ensured that I'd get no dents or scratches.

The 5" sound hole clamps I recieved from Stewmac are perfect for acoustic guitar repairs. Great clamps easy to use and fully adjustable.

These clamps are perfect for clamping a bridge on a classical guitar. The smaller soundhole of the classical guitar is difficult enough; its disposition farther from the bridge makes depth an issue. If you add a fingerboard extension for a 20th fret, you have a serious problem, especially if you have large hands. The leveler supports the clamp perfectly to prevent distortion of a thin (2.2mm) top. The light construction is not a problem if the parts require minimal force to fit.

I used 3 of the 7 inch clamps to secure the bridge after gluing. They worked well.

Nice light clamps, perfect for glueing bridges and loose braces!