Stewart-MacDonaldEverything for building and repairing stringed instruments!
Your order cart Your order | Account | Saved list
Sign in
Email
800-848-2273, 9AM-6PM EST, M-F
Home Free catalog Quick order International Customer service

Home : Trade Secrets Archive : Issue 128, How (and why) to use templates to rout control cavities
Trade Secrets NEWSLETTER
Email a friend









 Processing...






Cartoon: Erick routingBuild yourself a custom solidbody
How (and why) to use templates to rout custom-shaped control cavities
A clean rout isn’t so tough when you set
yourself up for it beforehand.
Erick Coleman, December 9, 2010
Photo: Erick routing Turning a wooden blank into a slab-body electric is a good way to build your first guitar. It’s not as easy as assembling a ready-made body but it’s not overwhelming, and you’ll build more skills.
When you feel like giving it a shot, here are some tips to help you with routing control cavities, which might be your main challenge.
If this’ll be your first time building, maybe you want to focus on the body only, and use a ready-made neck.
Anyway, here we go with some tips:


Bass Necks
Photo: body blankCopy a reference guitar. If you haven’t already got your heart set on a custom body shape, think about making a knockoff of a classic.
Image: Musicmaster shapeThat’s what I’m doing — I'm building a Musicmaster style bass for my wife, Missy. I've got an actual Musicmaster to take measurements from, and that’s really handy. Unlike a Les Paul, this body won’t have a carved top. It’s a simple slab (faster and easier).
Image: don't shape it yet!Don’t cut the body shape yet! I know you want to start by heading to the bandsaw and making that body blank look guitar-shaped, but hold off. After laying out your centerline and drawing the body on the blank wood, your first cuts should be routing the cavities for the neck and the electronics.
I got this tip from seeing an old photo that showed how the Gibson factory worked. It makes sense: do your routing while you’re still working with a rectangle of wood. This way, if you make a little slip-up in routing, you can just shift your centerline and readjust, so things wind up where they ought to be on the body.
Electric Guitar Body Blanks
Photo: template detail Use a routing template. Don’t expect to freehand-cut with that router! You need a template to guide the cut. A bearing above the router bit rides along the template’s shape while the bit is cutting. I didn't have a template for this bass, so I’ll show you how I made one.
Photo: tracing onto the template I started with a piece of clear template material, positioning it over the control cavity in the bass I was working from. Looking straight down from above, I traced the cavity with a permanent marker. The shape has to be just large enough to hold the pots and the jack, and small enough to hide under the pickguard. I laid a pickguard on my drawing to check the size before cutting the template.
Blank Template
Photo: sawing the shape I started the cutting with a Forstner bit, drilling out the lion's share of the material on my drill press. Be careful! Use goggles and clamp the acrylic in place before cutting — drill bits can suddenly grab in plastic. Then I switched to a coping saw to remove the remaining material, following the line I traced.
Pearl Cutting Saw
Photo: filing the shape After roughing out the shape, I used a file to clean up the edges so the router bearing rides on a nice smooth surface.
This’ll make the actual routed hole clean and factory-like, with no cobbled “did it myself” look.
Photo: Erick, finished Here’s my template. Let’s go rout!
Cartoon: Erick running
Photo: magnet handles
Most templates are already available.
We have ready-to-use templates for pickups, tremolos, neck joints, mandolin building and much more. Check them out:
Photo: magnets in use
Photo: shimming the template Shim the template. The first cuts are easier if the template is raised up a bit. That way, the bearing rides on the template while the tip of the cutting bit makes a shallow cut. You can see I shimmed my template with scraps of the same clear material, but the shims could be made of anything. Double-stick tape holds all this together while I rout.
Double-stick Tape
Photo: double-thick template When you have two of the same template, that’s a great situation. Double-stick tape them together and use them as one — you won’t need to add any shims. At left is a double-template from a different project.
Photo: stacked router bearingsWith the template secured to the wood with double-sticky tape, it's time to set up the router for the job.
I drilled a hole about 1" deep to give the bit a recess to fit into to start. With the cutting blades right at the top of the body blank, be sure that the bearing meets the template. Then lower the bit for your first shallow cut.
Notice the three stacked bearings highlighted in the yellow box. The binding router bit comes with one bearing that can be positioned up or down the shaft by inserting a spacer. I’ve got extra bearings, and I use them all at once. This way, I don't have to stop and reposition the bearing height as the cut goes deeper.
Ball Bearing Router Bits
Animation: router motion Don’t let the bit pull you.
When routing, move the spinning bit into the wood as indicated by the arrow at left. If you moved the router in the opposite direction it would grab the wood and pull itself forward — called “climb cutting.” A climb cut is useful on delicate spruce guitar tops, but for a heavy cut in solid wood like this it can make the router jump or chatter, damaging the work.
Photo: routing After a couple of passes you can remove the template and lower the bit and bearing into the cavity. The sidewalls you’ve already routed now act like the template, guiding the router as you cut to the final depth of 1-1/16". The shallower channel for the connecting wire is 3/4" deep.
Bosch Colt Router
Photo: finished Woohoo! There it is: my clean custom control cavity!
Photo: bandsawing
Finally, it’s bandsaw time. With all cavities routed in their correct spots, it’s time to saw the body shape. This is starting to look basslike at last!
Image: Erick's signature
Problem-solving products for this kind of work:
Blank Template
Clear acrylic, 9-3/8" x 6" x 3/16" (238.13 x 152.40mm x 4.76mm), for making your own templates or clamping cauls.
Pearl Cutting Saw
Delicate control for intricate cutting. Aluminum frame with rubberized handle and 3" throat depth.
Ball Bearing Router Bits
Extra-long carbide tipped router bits for control cavity, pickup and other solidbody routing tasks.
More More More
Replacement Neck for Fender Bass
This high quality neck feels and plays great! Hard rock maple finished in clear satin polyurethane, with a walnut "skunk stripe" down the back.
Double-stick Tape
108 feet of clear polyester tape is adhesive-coated on both sides, for holding router templates and attaching acoustic guitar pickguards.
Bosch Colt Router
A practical combination of power and compact size. Ideal for the MacRostie Binding Trimmer and our TrueChannel Binding Routing Jig.
More More More

Toll-free order line:   800-848-2273   9am-6pm Eastern Time, M-F



Your order | Your account | Trade Secrets E-mail Newsletter
Home | Free catalog | Catalog Quick Order | International | Customer service
Our guarantee | Shipping | Security & Privacy | Contact us
Site map | About Us | Employment
© Copyright 2014 Stewart-MacDonald
Your shopping is secure with VeriSign! Trusted Commerce