Stewart-MacDonaldEverything for building and repairing stringed instruments!
Your order cart Your order | Account | Saved list
Sign in
Email
800-848-2273, 9AM-6PM EST, M-F
Home Free catalog Quick order International Customer service

Home : Trade Secrets Archive : Issue 106, Simple inlay repair on a Les Paul Triumph bass
Trade Secrets NEWSLETTER
Email a friend









 Processing...






Photo: Les Paul bass I don’t see one of these every day!
Simple inlay repair on a
Les Paul Triumph bass

Erick Coleman, February 4, 2010
Photo: Erick Coleman
Photo: Les Paul bass Photo: Erick Coleman
Photo: Les Paul bass
Photo: missing inlayThis early-’70s Gibson Les Paul Triumph bass belongs to my friend Jon. It's been in his family for decades. These oddball basses feature low-impedence pickups and a control panel similar to the LP Recording Models of the period. Very cool!
It’s in fine shape and plays great, but the middle part of its split diamond peghead inlay is missing. That tiny detail stands out and really draws your attention when looking at the instrument — kind of like a missing tooth.
Replacing a rectangular piece of pearl is quick and easy, and I'm going to do it as a favor to Jon. Here we go:
Photo: clearing out the cavity After removing two of the tuners to give myself some room to work, I used a micro chisel to clear the old glue and bits of debris out of the inlay cavity.
Micro Chisels
Photo: measuring the cavityI measured the length, width and depth of the area with my digital caliper.
Luthier’s Digital Caliper
Photo: marking the inlayI marked out the dimensions on the pearl blank. A piece of masking tape on the blank gives me a good surface to draw on.
I'm ready to start cutting pearl.
Individual Inlay Blanks
Photo: pearl samplesGreen abalone, figured pearl, gold pearl and black
pearl in blanks for custom work, or already cut into
ready-to-inlay shapes.

Photo: cutting the pearlIt only took a minute to rough cut this blank using a fine-tooth blade.
Pearl dust is nasty stuff so wear eye protection and a dust mask when cutting and sanding inlays!
Pearl Cutting Jig
Photo: sanding to size I fine-tuned the size by sanding the piece to the proper dimensions using 320-grit Stikit paper on my workbench.
320-grit is a good choice. Coarser paper makes deeper scratches, and finer paper can leave the piece so smooth that glue won’t hold it well.
Stikit Gold Self-Adhesive Abrasives
Photo: new inlay too brighrAfter a few tries, I was able to tweak the new inlay to get a perfect fit — but it's too bright looking! The old lacquer topcoats over the peghead face have taken on a nice vintage color over the years, so my missing tooth problem is now a color mismatch instead.
Of course I want to leave the original peghead finish as-is, so I'll spray matching lacquer onto the inlay before installing it.
Photo: coloring the new inlayBefore going crazy mixing custom lacquer colors, I recalled Dan Erlewine used vintage amber aerosol lacquer on a '52 Les Paul peghead, with great results. I tested a single light coat on a pearl scrap and got a near-perfect match, so I did the same on the actual inlay.
I used a micro chisel to scrape a few bare spots on the dried lacquer to match the worn look of the rest of the inlay. I also scratched a few cross-hatch lines on the back to give the glue something to bite onto.
Colortone Tinted Aerosol Guitar Lacquer
I used only a few small dabs of #20 super glue to hold the inlay in place. I didn't want any glue squeeze-out to require touch-ups on the peghead face. I then clamped the inlay in place using a wax paper covered caul and a camless clamp for a few minutes while the super glue cured.
Camless Clamps
Photo: finished bass!The final product looks pretty darned good!
This great piece of Les Paul history is going back to its owner with a complete smile, but not before getting the obligatory brick wall shot!
Image: Erick Coleman signature
Problem-solving products for this kind of work:
Pearl Cutting Jig
Complete outfit for cutting pearl, abalone, and other inlay materials. We also offer our special pearl cutting platform with air-blower nozzle!
Individual Inlay Blanks
Flat shell blanks for cutting custom inlays. 0.050"-thick. White or gold mother of pearl, and paua abalone.
Pearl Cutting Saw
Special saw and fine blades for intricate pearl cutting.
More More More
Colortone Tinted Aerosol Guitar Lacquer
The easiest way to spray a professional finish! Clear tints of nitrocellulose guitar lacquer.
Inlay Sets for Les Paul
Pre-cut fingerboard sets for Les Paul® Custom and Standard, ready to inlay.
Stewart MacDonald Super Glues
The only instant glues formulated specifically for instrument repair!
More More More

Toll-free order line:   800-848-2273   9am-6pm Eastern Time, M-F



Your order | Your account | Trade Secrets E-mail Newsletter
Home | Free catalog | Catalog Quick Order | International | Customer service
Our guarantee | Shipping | Security & Privacy | Contact us
Site map | About Us | Employment
© Copyright 2014 Stewart-MacDonald
Your shopping is secure with VeriSign! Trusted Commerce