Stewart-MacDonaldEverything for building and repairing stringed instruments!
Your order cart Your order | Account | Saved list
Sign in
Email
800-848-2273, 9AM-6PM EST, M-F
Home Free catalog Quick order International Customer service

Home : Trade Secrets Archive : Issue 28, Using the String Spacing Rule for guitars and mandolins
Trade Secrets NEWSLETTER
Email a friend









 Processing...






Photo: String Spacing Rule
Proportional String Spacing

The best string spacing for mandolins, and 12-strings, and bridge saddles, and...

I'm finding lots of new uses for our
string spacing rule. This tool isn’t
just for nuts anymore!


Erick Coleman signature Erick Coleman, May 3, 2007
Photo: Erick Coleman
First, here’s what “proportional spacing” is about

Photo: Equal/Proportional spacing
To your eye it's subtle, but your
hand feels the difference!
If you make six equally-spaced marks on a blank guitar nut, then cut six string slots, the heavy wound strings are going to feel a little crowded while the unwound treble strings feel gappy. That's the trouble with equal spacing: it ignores the fact that wide strings want more space than thin ones.

Proportional spacing is better because it adjusts for the thickness of each string individually, moving the heavier strings apart and the narrow strings together. But how do you do the calculations to find these proportional string spaces?

Photo: String Spacing Rule
Photo: Kevin Ryan Proportional spacing made easy: Kevin Ryan came up with the idea for our string spacing rule. (Kevin's a world-class luthier, with a fine eye for detail that’s helped to make his guitars famous.) The spacing rule is carefully calculated so that each step is wider than the one before. When you use it for nut slots, the bass strings get the space they need and the treble strings are also exactly right. It works with any nut, from mandolin-size to super-wide.

Not just for nuts: use it for bridges and saddles
We’re using this rule for jobs Kevin never intended: like Tune-o-matic saddles and acoustic guitar bridges. Proportional spacing is an advantage at the bridge as well as the nut — a subtle but worthwhile improvement. Kevin was surprised when told about using it for bridges: "It's amazing that I never thought of that!" said Kevin.
Photo: Marking a Tune-o-matic saddle
Tune-o-matic bridges
Use the string spacing rule to locate the notches in adjustable bridge saddles. Find the overall string width by aligning the two E strings on the neck and over the pickup polepieces, then use the rule to position the other four strings. I use a tracing scribe like a miniature scratch awl to make the starter marks.

Photo: Saddles
Tune-o-matic saddles
Photo: Marking an acoustic bridge
Acoustic bridges
Use the spacing rule to lay out acoustic bridges for new builds as well as replacement bridges for repair jobs.

Photo: Bridge blanks
Acoustic bridge blanks
Photo: patched bridge pin holes
Bridge pin holes
For a bridge replacement, you can start fresh by plugging the top and the bridge pad underneath with new round plugs of spruce. The BridgeSaver tool makes this easy, restoring the top to like-new condition so the bridge pin holes can be located exactly where they need to be.

Photo: BridgeSaver
Patch bridge pin holes, inside and outside, with the BridgeSaver
Photo: String Spacing Rule
Starting with the E-to-E string spread of the original bridge, lay out correct string positions with the spacing rule. Your bass string positions will feel correct to the player, and so will the treble strings.
Photo: Red Diamond mandolin spacing
Mandolin spacing
Customers call me on our tech support line to ask whether they can use the string spacing rule for 12-string and mandolin nuts. The answer is, absolutely!

Both 12-strings and mandos use paired strings. We'll refer to these as two “courses” of strings: one bass-to-treble course is paired by a second bass-to-treble course beside it.

Because these courses are very close together, spacing Is especially critical on mandolins. If two wound strings are too close, they can vibrate against one another. To avoid this, here are the measurements Don MacRostie uses for nut slots on Red Diamond mandolins:

Don's mando necks are 1.100" at the nut and he uses .940" overall spacing of the outside strings, centered on the nut. Starting from the outside E string, he gives the first course of strings an .831" spread. He locates the inner E 5/64" from the outer, and his second course of strings has an .862" spread (use your calipers to locate these spreads on your string spacing rule). With proportional spacing, the "G" strings at the bass side are 7/64" apart.

Measure in 5/64" from the bass side edge of the fretboard, and lay out the first course of strings (.862" spread). Next, measure in 7/64" from your G string mark, and lay out your second course.

Photo: Don MacRostie
Don MacRostie,
mandolin builder, heads our tool development team
Photo: steel ruler

Photo: Marking string spaces

Photo: 12-string spacing
12-string spacing
For 12-string guitars, builder Todd Sams marks his spacing on an index card, then transfers the marks to the nut:

Measure the width of the nut and mark it on an index card. Mark the positions of the two outermost strings on the card.

Lay out the first course of 6 strings, starting from the low E.

Slide the rule 7/64" to mark the second E, A, D and G strings. For the B and E strings, he works from the high E, sliding the rule 5/64" for the second course. (Sometimes he'll use a little more than 5/64" for the B and E, if that’s what the player prefers.)

Transfer the marks to the nut, positioning the set of 12 slots comfortably.

Here’s an idea: the next time I custom-wind a guitar pickup, why not use proportional spacing on the polepieces, too?!

Photo: Todd Sams
Todd Sams,
guitar maker,
manages our production shop
Erick Coleman signature

Problem-solving products mentioned above:
Photo: String Spacing Rule Photo: Essential Nut Making Tool Kit Photo: White Bone Nuts
String Spacing Rule
The fastest way to get accurate string spacing.
Essential Nut Making Tool Kit
The basic tools you'll need for shaping, string-spacing, slotting and fitting string nuts like a pro.
White Bone Nuts
SHAPED and blank sizes. Traditional material favored for classic tone.
Buy Now
Buy Now
Buy Now
Photo: Inlay Tracing Scribe Photo: Gauged Nut Slotting Files Photo: BridgeSaver
Inlay Tracing Scribe
Fine-point steel scribe for tracing pearl outlines on wood.
Gauged Nut Slotting Files
We offer a total of 16 gauged nut files for guitar, banjo, mandolin, bass, violin and more.
BridgeSaver
Special cutters form precisely dished cavities in the bridge plate, and matching wooden plugs. A money-making tool that can pay for itself with the first job!
Buy Now
Buy Now
Buy Now

Toll-free order line:   800-848-2273   9am-6pm Eastern Time, M-F



Your order | Your account | Trade Secrets E-mail Newsletter
Home | Free catalog | Catalog Quick Order | International | Customer service
Our guarantee | Shipping | Security & Privacy | Contact us
Site map | About Us | Employment
© Copyright 2014 Stewart-MacDonald
Your shopping is secure with VeriSign! Trusted Commerce