Stewart-MacDonaldEverything for building and repairing stringed instruments!
Your order cart Your order | Account | Saved list
Sign in
Email
800-848-2273, 9AM-6PM EST, M-F
Home Free catalog Quick order International Customer service

Home : Trade Secrets Archive : Issue 24, Making a perfect bridge with the Sanding Station
Trade Secrets NEWSLETTER
Email a friend









 Processing...






Smoothly shaped bridge
With this shop-made jig,
I’m making better acoustic bridges than ever before

I liked the Luthier’s Friend Sanding Station the first time I saw it, and I use it a lot for thickness sanding. But messing around last Saturday, I got into a whole new ballgame with it...

Dan Erlewine signature Dan Erlewine, April 5, 2007
Photo: Dan Erlewine
Luthier's Friend Sanding Station
I planned to show you just two simple tips with the Sanding Station, but after I shot those photos I couldn’t stop using it! I was having fun, and I spent last Saturday making this radius jig for bridges. Let’s take a quick look at those two tips so I can get to the part about the radius-sanding:


TIP #1: Keep things moving while you sand binding strips


Keep moving while sanding
To keep from loading one small area of the Robo-Sander, move the binding up and down against the fence as you pull the strip through. Don’t treat plastics the same as wood as they will quickly clog a sanding drum and render it useless -- it's always better to scrape plastic bindings. Also, plastics, especially celluloid-nitrates, can catch fire from the friction of sanding, so save this technique for wood bindings.
TIP #2: Use the Robo-Sander’s guide wheel with a plywood pattern
Pattern sanding
Plywood pattern
After sanding a rosewood bridge blank to uniform thickness, I rough-cut it into shape on a band saw. I made a simple plywood pattern with two 3/16" wood dowels for indexing pins. These dowels fit the two E-string holes, holding the bridge blank on the pattern. The pattern is carefully cut to my final bridge shape, and it stays with the bridge through most of the building. It’s reusable for making more bridges exactly like this one.

I “pattern-sand” the bridge to shape as the guide wheel of the Robo-Sander follows the plywood, and the sanding drum removes the wood.
In all these photos, I’ve removed the dust collector from the Luthier’s Friend to give you a better view.
Sanding the bridge ends
The same pattern holds the bridge on its side while I shape the narrow ends — producing a factory-precise uniform curve that’s very difficult to get by hand.
The plywood pattern stays with the bridge throughout the whole process, giving me a better grip than just hanging onto the rosewood alone.
Now for the best part: check out this radius jig!
Radius-sanding jig

Spring steel hold-downs
Take a moment to see what’s going on in this picture:
I’ve switched the bridge to a different pattern jig; this one has a curved back which mates with another curved piece against the Sanding Station’s fence. The two slide against each other like a ball-and-socket joint. This moves the top of the bridge across the sanding drum in a perfect curve (this jig’s set to a 16" Martin-style radius.) Some paste wax on the surfaces keeps them sliding smoothly.

To make this radius jig, I first cut the curved block you see against the fence, then I put 80-grit Stikit Gold sandpaper on it to sand the convex piece to match.

Two spring-steel hold-downs apply pressure to keep the work tightly against the fence. These are made from three overlapped pieces of black steel straps from a large shipping crate. Anchored in a piece of plywood, they’re like the leaf springs in an automobile suspension. Each of the three pieces is about 3/4" longer than the next, and together they give a good feathering affect.
Banner: Secure web shopping
Nicely shaped bridge

Here's the result: a sharp-looking custom-fit bridge!

The next step was to finish it up with a saddle slot and the remaining four bridge pin holes. That might turn up some good Trade Secrets, too!

Dan Erlewine signature

Problem-solving products mentioned above:
Photo: Luthier's Friend Sanding Station Photo: Robo-Sander Photo: Robo-Sander
Luthier's Friend Sanding Station
The versatile Luthier's Friend Sanding Station works with your shop drill press. It lets you thickness-sand small parts quickly and accurately. Pattern-sand with your own templates, too.
Robo-Sander
The Robo-Sander abrasive drum works with your drill press. Available in three diameters, it features a built-in guide wheel for accurate pattern-sanding using templates you make in your own shop.
Replacement Abrasive Sleeves
Replacement abrasive sleeves for your Robo-Sander™ or the Luthier's Friend™ Sanding Station. Sold individually.
Buy Now
Buy Now
Buy Now
Photo: Bridge Blanks Photo: 3M Stikit Gold Paper Self-adhesive Abrasives Photo: Natural Wood Bindings
Bridge Blanks
Ebony and rosewood rectangular undrilled blanks for custom replacement work.
3M Stikit Gold Paper Self-adhesive Abrasives
Superior abrasive papers, sized for our radius-sanding blocks and fret/fingerboard levelers.
Natural Wood Bindings
Precut natural curly maple with or without laminated edge trim.
Buy Now
Buy Now
Buy Now

Toll-free order line:   800-848-2273   9am-6pm Eastern Time, M-F



Your order | Your account | Trade Secrets E-mail Newsletter
Home | Free catalog | Catalog Quick Order | International | Customer service
Our guarantee | Shipping | Security & Privacy | Contact us
Site map | About Us | Employment
© Copyright 2014 Stewart-MacDonald
Your shopping is secure with VeriSign! Trusted Commerce