Weld-On Cement

Works like a charm. Messy but effective.

Once you get a feel for it, you can get into a real groove. The flow started a bit quick, but it is easily figured out. Probably won't need more for a while, but will definitely order it again.

this stuff work good but you have to understand that it dries really fast so do a small area as you go and used a small brush, I put on 3 layers of binding with this at one time and the guitar came out really good

I have been using this glue hundred of times and it is great stuff. Luthier Larry Threet

Glue set fast, so use it in small increments. For bigger pieces have 4 hands to move quickly. Bonded great! Will use again.

This stuff is great. I just did my first binding job with it and it worked very well. The only problem I had was doing the purfling. After I put all the strips together it was hard to shape it. The strips did not hold and separated. This may have been something I did wrong but the glue did not hold when I had to bend around the tight corners of the horns, but was easily repaired afterwards. Other than that, it came out awesome!! I was not made aware that you could get the purfling already done, Duh!! That would have helped a bunch.

This stuff is horrible. There is no easy way to apply this. The glue dries in the tip of the tube and when you go to apply, it just gushes out. My hands are covered in this stuff. The glue so fast and you have to do it in sections, which it says no where on the page you order it. It does say it on a completely different page about binding. Why would you put the instructions on how to use this product on a different page that tells you binding details? The only positives are that it does hold and doesn't soak into the wood much so it's not too hard to get extra off. After getting so many quality products from stewmac, I don't know why they would sell this glue in a tube.

excellent

Bought this for binding but tried it to glue on a plastic headstock overlay on a Harmony Sovereign . I had to apply to a large area and the glue dried before I had a chance to clamp it .
Should be fine for binding if instructions are followed and glue is applied a section at a time and pressed onto guitar . I didn't look at the online instructions until after my first try .

I have been using this for over 15 years, never had any problems with it.