| DEPARTMENTS |
|
| Accessories |
|
| Bindings,
trim |
|
| Bodies,
necks, wood |
|
| Books,
plans |
|
| Bridges,
tailpieces |
|
| Electronics,
pickups |
|
| Finishing
supplies |
|
| Fretting
supplies |
|
| Glues,
adhesives |
|
| Hardware,
parts |
|
| Inlay,
pearl |
|
| Kits |
|
| Knobs |
|
| Nuts,
saddles |
|
| Pickguards |
|
| Tools |
|
| Truss
rods |
|
| Tuners |
|
| Video, DVD |
|
|
|
|
High impedance hum-cancelling pickups
EMG Select Hybrid Bass Pickup Set
Hi-Z. Low noise. Pure power!
A set combining the punch and clarity of Select's single-coil bridge-position pickup for Jazz Bass®, plus the smooth, warm response of the split pickup for P-Bass®. A popular and versatile combination for a wide tonal palette. Screws and shielded wire included.
See details below
|
|
|
|
|
|
|
|
|
•Wide bandwidth, high output
•Blade polepieces for uniform string-to-string response
Each Select pickup is shielded and epoxy-sealed for low noise and microphonic-free performance. State-of-the-art sound at affordable prices! Note: these are not "active" pickups and do not require batteries.
Bridge-position J-Bass pickup 7.1K ohm
Dimensions: 3-11/16" x 11/16" x 29/32" tall (93.66mm x 17.46mm x 23.02mm)
Mounting screw hole spacing: 1-19/32" (40.48mm)
Blade polepiece is 3" (76.20mm) long.
Split P-Bass pickup 8.1K ohm
Dimensions: 2-3/16" x 1-1/16" x 3/4" (55.56mm x 26.99mm x 19.05mm)
The internal bar polepiece is 1-3/8" to 1-1/2" (34.93mm to 38.10mm) long.
Wiring: These pickups feature a shielded 2-conductor output wire. White is the hot output, yellow is ground. Use 250K or 500K control pots, 500K will sound brighter than 250K. Choose a Wiring Kit separately.
P Bass® and Jazz Bass® are registered trademarks of Fender Musical Instruments Corporation.
Shown on page 44 of our latest catalog.
|
|
|
|
Details
Pictures
